Maytag Dishwasher Error F8
⚡ Quick Answer: The Maytag dishwasher F8 error indicates a drainage issue, often caused by a drain pump failure or water accumulation in the drip pan. Symptoms includ... ✅ DIY Fixable
What Does Error F8 Mean?
The Maytag dishwasher F8 error indicates a drainage issue, often caused by a drain pump failure or water accumulation in the drip pan. Symptoms include unusual noises, water remaining in the base, and the dishwasher halting mid-cycle. F8 is part of the F8E4 fault code, suggesting that the appliance cannot drain properly due to blockages or faulty components.
Common Symptoms:
- Dishwasher halts mid‑cycle with error displayed
- Water remaining in dishwasher base or drip pan
- Dishwasher stops and won’t run wash cycle
- Unusual noises during drain cycle
Possible Causes
- Water detected in drip pan / float switch triggered by water accumulation (medium)
- Drainage blockage causing back‑up of water (medium)
- Faulty drain pump or impeller obstruction (medium)
- Improper installation or loose water supply/overflow connections (medium)
How to Fix Error F8
DIY Fix Check for visible water accumulation and clear blockages
- Turn off the dishwasher and disconnect power.
- Remove the bottom rack and inspect the dishwasher base for standing water or overflow.
- Clean the drain filter and inspect the drain hose for kinks or clogs.
- Ensure the float switch moves freely and is not obstructed.
Technician Only Inspect and service drain pump and internal components
- Remove access panel to inspect the drain pump and impeller.
- Clear any debris or foreign objects within the pump or hoses.
- Test the drain pump motor operation with appropriate tools.
- Verify float switch and water inlet connections and replace faulty parts as needed.
Parts needed: Drain pump assembly, Drain hose, Float switch, Water inlet valve
- The error persists after cleaning and resetting.
- There are signs of leaks or water damage beneath the appliance.
- The drain pump fails or emits unusual noises during operation.
Next step
Choose the next step for F8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | W10882888 |
| voltage_rating | 120V AC |
Common Questions
What does F8 error mean on Maytag dishwasher?
F8 error indicates a drainage issue, often due to a pump failure or water in the drip pan.
Can I fix Maytag dishwasher F8 error myself?
Yes, you can check for blockages, clear water accumulation, and clean the drain filter.
How much does it cost to fix F8 error?
Repair costs range from ¥10,000 to ¥30,000+, depending on parts and labor.
When should I call a technician for F8?
Call a technician if the error persists after DIY efforts or if there are signs of leaks.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!