Maytag Dishwasher Error F1E1

⚡ Quick Answer: The Maytag dishwasher F1E1 error indicates a malfunction in the drain pump. This fault halts the drain sequence, often accompanied by unusual noises. ... ⚠️ Difficulty Varies

What Does Error F1E1 Mean?

The Maytag dishwasher F1E1 error indicates a malfunction in the drain pump. This fault halts the drain sequence, often accompanied by unusual noises. Service intervention is recommended to diagnose and resolve issues with the control board or relay components.

Common Symptoms:

  • Dishwasher enters drain sequence then stops operation when F1E1 appears

Possible Causes

  • Control system fault detected by dishwasher diagnostics (high)
  • Stuck relay or malfunction on electronic control board (medium)

How to Fix Error F1E1

DIY Fix Basic reset and safety procedure

  1. If safe, turn off water supply to the dishwasher.
  2. Turn off power to the dishwasher (unplug or switch off circuit breaker).
  3. Press the Cancel key once to silence alarm tone per official instructions.
  4. Wait a few minutes then restore power to see if error clears.

Technician Only Diagnose and resolve control board or component faults

  1. Disconnect dishwasher from power.
  2. Remove access panels to reach the electronic control board.
  3. Inspect control board for visible damage, burnt components, and stuck relays.
  4. Test control board relays and associated components according to model-specific service manual.
  5. Replace control board if relays or circuits are confirmed faulty.

Parts needed: Electronic control board, Relay components

🛑 When to Call a Pro:
  • If the error persists after basic reset steps.
  • If you are not comfortable accessing internal components or lack proper tools.
  • If control board diagnostics indicate faults requiring specialized replacement or programming.

Next step

Choose the next step for F1E1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does F1E1 error mean on Maytag dishwasher?

F1E1 means a malfunction in the drain pump, stopping operation during the drain sequence.

Can I fix Maytag dishwasher F1E1 error myself?

Yes, you can perform a basic reset and check for issues if you're comfortable.

How much does it cost to fix F1E1 error?

$150–$500+ depending on the control board and labor costs.

When should I call a technician for F1E1?

Call a technician if the error persists after a reset or if you're not comfortable accessing internal components.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!