Maytag Dishwasher Error F10
⚡ Quick Answer: The Maytag dishwasher F10 error code indicates a potential malfunction related to the drain pump, which may cause interruptions in the wash cycle and ... ✅ DIY Fixable
What Does Error F10 Mean?
The Maytag dishwasher F10 error code indicates a potential malfunction related to the drain pump, which may cause interruptions in the wash cycle and unusual operational noises. If you encounter this error, it is essential to inspect the water intake system, as issues with the water supply can lead to this malfunction. Ensure the water supply valve is open, check for kinks in the hose, and clean inlet screens for debris.
Common Symptoms:
- Reported dishwasher interruption and inability to complete cycle (community anecdote)
Possible Causes
- Drain Pump
- Wiring Issues
- Control Board Failure
How to Fix Error F10
DIY Fix Basic checks for water intake and supply
- Ensure the water supply valve to the dishwasher is fully open.
- Check that the water supply hose is not kinked and is properly connected.
- Inspect inlet screens at the water connection for debris and clean them if necessary.
Technician Only Inspect water intake system components
- Verify proper water flow and pressure at the dishwasher inlet.
- Test the water inlet valve and float/level sensors for correct operation.
- Check internal water pathway and pressure/level sensing circuits for faults.
Parts needed: Water inlet valve, Float switch or level sensor, Hoses and connectors
- If the error persists after basic water supply checks and the dishwasher fails to progress through cycles consistently.
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F10 error mean on Maytag dishwasher?
The F10 error indicates a potential malfunction in the drain pump, often causing cycle interruptions.
Can I fix Maytag dishwasher F10 error myself?
Yes, check the water supply valve, inspect the hose for kinks, and clean inlet screens.
How much does it cost to fix F10 error?
Repair costs vary based on parts and labor; consult a technician for an estimate.
When should I call a technician for F10?
Call a technician if the error persists after performing basic checks and the dishwasher fails to complete cycles.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!