Maytag Dishwasher Error E6
⚡ Quick Answer: The Maytag dishwasher E6 error code indicates a potential malfunction in the drain pump, which may lead to unusual noises during operation. To address... ✅ DIY Fixable
What Does Error E6 Mean?
The Maytag dishwasher E6 error code indicates a potential malfunction in the drain pump, which may lead to unusual noises during operation. To address this issue, you can try power-cycling the dishwasher by disconnecting the power for at least 30 seconds before restoring it. If the E6 error persists, further troubleshooting of internal components like the water inlet valve, float switch, and control board may be necessary.
Common Symptoms:
- Dishwasher displays "E6" on control panel
Possible Causes
- Drain Pump
How to Fix Error E6
DIY Fix Power‑cycle dishwasher control to clear the code
- Disconnect power to the dishwasher by unplugging the unit or turning off the breaker
- Wait at least 30 seconds
- Restore power and attempt to run a cycle
Technician Only Troubleshoot internal sensors and water system
- Use diagnostic mode (if available) to read any stored fault data
- Check water inlet conditions (valve, pressure, float switch)
- Inspect temperature and turbidity sensors for proper function
- Inspect wiring harnesses and control board connections
Parts needed: water inlet valve, float switch, temperature sensor, turbidity sensor, control board
- After power‑cycle and basic checks if E6 persists
- If other symptoms appear
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | W10605057 |
| voltage_rating | 120V AC |
Common Questions
What does E6 error mean on Maytag dishwasher?
E6 indicates a malfunction in the drain pump, often with unusual noises.
Can I fix Maytag dishwasher E6 error myself?
Yes, try power-cycling the dishwasher to clear the code.
How much does it cost to fix E6 error?
Estimated repair costs range from $50 to $300+ depending on parts and labor.
When should I call a technician for E6?
Call if E6 persists after power-cycling or if other issues arise.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!