Maytag Dishwasher Error E3
⚡ Quick Answer: The Maytag dishwasher error E3 signifies a heating system issue where the water fails to reach the necessary temperature during the wash cycle. This e... ✅ DIY Fixable
What Does Error E3 Mean?
The Maytag dishwasher error E3 signifies a heating system issue where the water fails to reach the necessary temperature during the wash cycle. This error may result in the dishwasher stopping mid-cycle, leading to poor cleaning performance. Common causes include a faulty heating element, a malfunctioning thermostat or temperature sensor, or inadequate water supply temperature.
Common Symptoms:
- Error E3 appears on display during wash cycle when heat is expected.
- Dishwasher stops mid‑cycle and does not complete wash.
- Possibly poor cleaning performance if water fails to heat adequately.
Possible Causes
- Faulty heating element (medium)
- Thermostat/temperature sensor malfunction (medium)
- Water supply temperature too low (low)
How to Fix Error E3
DIY Fix Reset the Dishwasher
- Turn off the dishwasher and disconnect power (unplug or turn off breaker).
- Wait at least 30 seconds.
- Restore power and try running a cycle to see if the error clears.
Technician Only Inspect and Test Heating and Temperature Components
- Disconnect dishwasher from power.
- Access the heating element and check continuity with a multimeter.
- Check the thermostat/temperature sensor for proper function and secure wiring.
- Replace defective heating element or sensor as needed.
Parts needed: heating element, thermostat/temperature sensor
- If E3 persists after resetting and user checks of water supply temperature.
- If the technician diagnosis suggests control board or complicated internal electrical faults.
- If you do not have tools or experience to test heating element and sensors safely.
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | W10537869 |
| voltage_rating | 120V AC |
Common Questions
What does E3 error mean on Maytag dishwasher?
E3 indicates a heating issue where water isn't reaching the required temperature, affecting wash performance.
Can I fix Maytag dishwasher E3 error myself?
Yes, you can reset the dishwasher by disconnecting power for 30 seconds and then restoring it.
How much does it cost to fix E3 error?
Estimated repair cost ranges from $60 to $200 for parts, plus labor.
When should I call a technician for E3?
Call a technician if E3 persists after resetting or if there are complex internal faults.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!