Maytag Dishwasher Error E15

⚡ Quick Answer: The Maytag dishwasher E15 error indicates a water leakage issue, often triggering the dishwasher's safety leak detection system. When this error occur... ✅ DIY Fixable

What Does Error E15 Mean?

The Maytag dishwasher E15 error indicates a water leakage issue, often triggering the dishwasher's safety leak detection system. When this error occurs, the dishwasher may stop mid-cycle, accompanied by a beeping sound and the E15 code displayed on the control panel. This suggests that water has been detected in an area where it shouldn't be, potentially due to a small leak.

Common Symptoms:

  • Dishwasher stops mid‑cycle
  • E15 displayed on control panel
  • Possible water leakage or presence of water in base of unit

Possible Causes

  • Water leak detected inside dishwasher triggering leak detection system (high)

How to Fix Error E15

DIY Fix Stop operation and shut off water

  1. Stop the dishwasher if it is currently running.
  2. Turn off the water supply to the dishwasher to prevent further leakage.
  3. Unplug or disconnect power to the dishwasher for safety.

Technician Only Inspect and repair leak source

  1. Access the base pan area to inspect for accumulated water.
  2. Check hoses, seals, door gasket, and tub for signs of leakage.
  3. Repair or replace any leaking components (hose, seal, tub section, etc.).
  4. Verify float or leak detection sensor is functioning correctly after repair.

Parts needed: leak detection sensor/float, door gasket/seals, supply/drain hoses, tub/water containment components

🛑 When to Call a Pro:
  • If water is visibly leaking from the dishwasher.
  • If the E15 error persists after shutting off water and power.
  • If you cannot safely access or identify the source of the leak.

Technical Specifications

wattage 1440W
component Float Switch
resistance 10-20 ohms
part_number W10823090
voltage_rating 120V AC

Common Questions

What does E15 error mean on Maytag dishwasher?

E15 error means a water leak has been detected, causing the dishwasher to stop mid-cycle and display the error.

Can I fix Maytag dishwasher E15 error myself?

Yes, you can stop the dishwasher, turn off the water supply, and unplug it to prevent further leakage.

How much does it cost to fix E15 error?

Repair costs vary widely; simple parts like gaskets or hoses are lower, while tub assemblies or sensors are higher.

When should I call a technician for E15?

Call a technician if there's visible leaking, the E15 error persists after power and water are shut off, or if the leak source is inaccessible.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!