Maytag Dishwasher Error E1
⚡ Quick Answer: The Maytag dishwasher E1 error indicates a drainage issue, typically causing the appliance to halt operation. Users may experience unusual sounds from... ✅ DIY Fixable
What Does Error E1 Mean?
The Maytag dishwasher E1 error indicates a drainage issue, typically causing the appliance to halt operation. Users may experience unusual sounds from the pump and a blinking display. This error can occur due to problems with the water supply or drainage system, necessitating a thorough inspection of the inlet valve, filters, and hoses.
Common Symptoms:
- Dishwasher stops operation and displays E1 code
- Possible failure to fill, heat, or drain properly as inferred from community sources
Possible Causes
- Insufficient or incorrect official documentation available (high)
- Community-reported water supply or drainage issues (medium)
How to Fix Error E1
DIY Fix Basic checks and reset
- Ensure the water supply valve to the dishwasher is fully open
- Check that the dishwasher’s float and inlet area are not obstructed (as Maytag suggests for general errors)
- Disconnect power (unplug or turn off breaker) for ~30 seconds and restore to reset control panel
- Run a short cycle to see if the E1 code returns
Technician Only Inspect water system and basic components
- Verify proper water pressure and inlet valve operation
- Inspect inlet hose for kinks or blockage
- Check dishwasher filters and drainage pathway for blockages
- If equipped, test temperature and level‑sensing components with appropriate tools
Parts needed: water inlet valve, filter/drain components, hoses
- Error persists after basic checks and reset
- Visible leaks or significant drainage obstruction
- Uncertain electrical issues
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | W10882880 |
| voltage_rating | 120V AC |
Common Questions
What does E1 error mean on Maytag dishwasher?
E1 indicates a drainage issue, causing the dishwasher to stop operation and display unusual sounds.
Can I fix Maytag dishwasher E1 error myself?
Yes, check the water supply, ensure the float is clear, and reset the dishwasher.
How much does it cost to fix E1 error?
Repair costs range from $50 to $150+, depending on parts and labor.
When should I call a technician for E1?
Call if the error persists after basic checks or if there are visible leaks.
Sources & References
- Maytag Dishwasher Error Code E1 listing (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!