Kleenmaid Dishwasher Error E9
⚡ Quick Answer: The E9 error on your Kleenmaid dishwasher indicates a potential issue with the drain pump, often leading to unusual sounds or a drain cycle error disp... ✅ DIY Fixable
What Does Error E9 Mean?
The E9 error on your Kleenmaid dishwasher indicates a potential issue with the drain pump, often leading to unusual sounds or a drain cycle error display. To troubleshoot, try resetting the dishwasher by powering it off and unplugging it for about five minutes. Additionally, inspect and clean the dishwasher's filter and spray arms for any blockages, and ensure the door is fully closed and latched before attempting another cycle.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E9
DIY Fix Basic checks for dishwasher displaying E9
- Power off the dishwasher and unplug it (or turn off circuit breaker) for ~5 minutes, then restore power and retry a cycle.
- Check and clean the dishwasher’s filter and spray arms for blockages.
- Ensure the dishwasher door is fully closed and latched.
- Inspect visible hoses for kinks or obstructions.
Technician Only Professional inspection
- Perform a diagnostic check using Kleenmaid service tools (if available).
- Inspect inlet valve, drain pump and sensors connected to water flow.
- Check wiring harnesses and connectors for corrosion or damage.
Parts needed: inlet valve, drain pump, flow sensor (if present), door latch/switch
- If the dishwasher shows signs of water leakage under the unit.
- If error reoccurs after basic troubleshooting.
- If internal components (pumps/valves) appear damaged.
Next step
Choose the next step for E9
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E9 error mean on Kleenmaid dishwasher?
E9 indicates a potential problem with the drain pump, affecting the drain cycle.
Can I fix Kleenmaid dishwasher E9 error myself?
Yes, you can try resetting the dishwasher and cleaning the filter and spray arms.
How much does it cost to fix E9 error?
Repair costs range from ¥10,000 to ¥40,000, depending on technician labor and parts.
When should I call a technician for E9?
Call a technician if water leakage occurs, the error recurs, or if you notice damaged components.
Sources & References
- Kleenmaid DW6030 User Manual (no error list) (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!