Kleenmaid Dishwasher Error E2
⚡ Quick Answer: The Kleenmaid dishwasher E2 error signifies a water drainage fault, indicating that the appliance is unable to drain water as expected. This is often ... ✅ DIY Fixable
What Does Error E2 Mean?
The Kleenmaid dishwasher E2 error signifies a water drainage fault, indicating that the appliance is unable to drain water as expected. This is often accompanied by a humming sound and may cause the dishwasher to stop mid-cycle, leaving standing water in the tub. Common causes include a clogged drain hose or filter, as well as a malfunctioning drain pump. Addressing these issues promptly can restore proper functionality.
Common Symptoms:
- Dishwasher stops mid‑cycle with E2 displayed
- Standing water at the bottom of the tub
- Cycle fails to advance past drain phase
Possible Causes
- Clogged drain hose or filter (medium)
- Malfunctioning drain pump (medium)
How to Fix Error E2
DIY Fix Clear drain obstructions
- Turn off power to the dishwasher.
- Remove the bottom rack and access the filter at the tub base.
- Remove and clean the filter under running water.
- Check the drain hose under the sink for kinks or blockages; clear any debris.
Technician Only Inspect and test drain pump assembly
- Disconnect dishwasher power and water supply.
- Remove access panel to expose the drain pump.
- Test pump electrical continuity with a multimeter.
- Check for mechanical bind or debris in pump impeller.
- Replace pump if defective.
Parts needed: Drain pump assembly, Drain hose, Filters
- If water remains after clearing visible blockages
- If pump fails electrical or mechanical testing
- If error persists after all basic service steps
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on Kleenmaid dishwasher?
The E2 error indicates a drainage issue, often stopping the cycle mid-way and causing standing water in the tub.
Can I fix Kleenmaid dishwasher E2 error myself?
Yes, you can try clearing drain obstructions by cleaning the filter and checking the drain hose.
How much does it cost to fix E2 error?
Repair costs for the E2 error typically range from $80 to $250, including parts and labor.
When should I call a technician for E2?
Call a technician if water remains after clearing blockages, if the pump fails tests, or if the error persists.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!