Kleenmaid Dishwasher Error E6
⚡ Quick Answer: The Kleenmaid dishwasher error code E6 indicates a potential malfunction in the drain pump, which may be accompanied by unusual noises during operatio... ✅ DIY Fixable
What Does Error E6 Mean?
The Kleenmaid dishwasher error code E6 indicates a potential malfunction in the drain pump, which may be accompanied by unusual noises during operation. This could lead to the dishwasher delaying or stopping its cycle. Basic troubleshooting steps include ensuring the door is fully closed, cleaning the filters, and resetting the machine by turning off the power for 1–2 minutes.
Common Symptoms:
- Error code E6 appears on display
- Dishwasher delays or stops cycle (based on community patterns for other brands)
Possible Causes
- Drain Pump
- Clogged Drain Filter
- Faulty Wiring
How to Fix Error E6
DIY Fix Basic Checks
- Ensure dishwasher door is fully closed and latched
- Check and clean filters at bottom of dishwasher
- Turn off power to the machine (via unplug or breaker) for 1–2 minutes and restart
Technician Only Diagnose with Manufacturer Manuals
- Obtain the correct service manual for your exact Kleenmaid model from Kleenmaid support
- Use service mode/testing procedures to read fault code meaning from PCB
- Inspect temperature sensor or other sensors if indicated by technical diagnostics
- Test and confirm correct resistance values of sensors
Parts needed: Temperature sensor (if diagnosed), Control board (if required by diagnostic)
- If error persists after basic restart and cleaning
- If diagnostic reading does not correspond to normal operating values
- If water leakage or other fault conditions occur
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E6 error mean on Kleenmaid dishwasher?
E6 error suggests a malfunction in the drain pump, possibly causing unusual noises and stopping the cycle.
Can I fix Kleenmaid dishwasher E6 error myself?
Yes, try ensuring the door is closed, cleaning the filters, and resetting the dishwasher.
How much does it cost to fix E6 error?
Repair costs vary widely depending on the specific issue and parts that need replacement.
When should I call a technician for E6?
Call a technician if the error persists after troubleshooting or if there are signs of water leakage.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!