Kleenmaid Dishwasher Error E3

⚡ Quick Answer: The E3 error code on your Kleenmaid dishwasher indicates a malfunction related to the temperature sensor. This can cause issues such as premature wash... ⚠️ Difficulty Varies

What Does Error E3 Mean?

The E3 error code on your Kleenmaid dishwasher indicates a malfunction related to the temperature sensor. This can cause issues such as premature wash cycle stoppage, failure to heat water adequately, and overall poor washing or drying performance. Unusual noises may also accompany the problem, signaling a need for inspection or repair to restore normal operation.

Common Symptoms:

  • Dishwasher displays E3 code during or after a wash cycle
  • Wash cycle may stop prematurely or fail to heat water properly
  • Poor washing/ drying performance may occur

Possible Causes

  • Temperature sensor (NTC) malfunction (medium)

How to Fix Error E3

DIY Fix Power cycle and basic checks

  1. Turn off and unplug the dishwasher or disconnect power at the breaker.
  2. Wait 2–3 minutes, then restore power.
  3. Restart a normal wash cycle to see if the error clears.

Technician Only Inspect and replace temperature sensor

  1. Access the dishwasher’s internal control area per the model’s service manual.
  2. Locate the temperature sensor/NTC thermistor on the tub/heating assembly.
  3. Test the sensor’s resistance with a multimeter at room temperature to check if within expected range.
  4. Replace the sensor if readings are out of specification.
  5. Verify proper connection to the control board and test with a cycle.

Parts needed: NTC temperature sensor / thermistor, Associated wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after power cycling and simple checks
  • If the problem recurs frequently or coincides with other faults
  • If internal component testing shows open/short sensor circuits

Technical Specifications

wattage 50W
component Drain Pump
resistance 5-15 ohms
part_number KLEENMAID DP12345
voltage_rating 240V AC

Common Questions

What does E3 error mean on Kleenmaid dishwasher?

The E3 error indicates a fault with the temperature sensor, impacting wash cycles and heating.

Can I fix Kleenmaid dishwasher E3 error myself?

Yes, you can try power cycling the dishwasher or performing basic checks to see if the error clears.

How much does it cost to fix E3 error?

The estimated cost to repair the E3 error ranges from ¥3,000 to ¥12,000 for parts, plus labor.

When should I call a technician for E3?

Call a technician if the error persists after power cycling or if it recurs frequently with other issues.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!