Kleenmaid Dishwasher Error E8
⚡ Quick Answer: The E8 error code on your Kleenmaid dishwasher indicates a potential issue with the door locking mechanism. This problem can cause the dishwasher to s... ✅ DIY Fixable
What Does Error E8 Mean?
The E8 error code on your Kleenmaid dishwasher indicates a potential issue with the door locking mechanism. This problem can cause the dishwasher to stop operation, prevent the cycle from starting, or result in the door not latching securely. If you hear unusual sounds from the pump or notice a flashing display, it could be related to the latch. Inspecting and cleaning the door latch area may resolve the issue.
Common Symptoms:
- Dishwasher stops operation and displays E8
- Potential failure to latch door securely
- Cycle won’t start or continues
Possible Causes
- Faulty or misaligned door latch / locking mechanism (medium)
How to Fix Error E8
DIY Fix Check and reseat door latch
- Inspect the dishwasher door latch for visible damage or obstruction.
- Open and firmly close the door, ensuring it latches securely.
- Clean around the latch area to remove debris that could prevent proper engagement.
Technician Only Inspect and replace door lock assembly
- Disconnect power to the dishwasher.
- Remove inner door panel to access door lock/latch assembly.
- Test latch switch continuity and check physical alignment.
- Replace faulty latch or lock mechanism if necessary.
Parts needed: Door latch assembly, Latch plate or striker, Associated mounting hardware
- If the dishwasher continues to display E8 after latch inspection and cleaning, and you’re unable to access internal parts safely.
- If there is visible damage to door components or electrical connections associated with the lock.
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | KLEENMAID DP1234 |
| voltage_rating | 240V AC |
Common Questions
What does E8 error mean on Kleenmaid dishwasher?
E8 error indicates a problem with the door locking mechanism, causing the dishwasher to stop or not start.
Can I fix Kleenmaid dishwasher E8 error myself?
Yes, check and reseat the door latch, ensuring it latches securely and is free of debris.
How much does it cost to fix E8 error?
Repair costs range from 50–150 USD for parts, plus labor.
When should I call a technician for E8?
Call a technician if the error persists after checking the latch or if there is visible damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!