Kleenmaid Dishwasher Error E14
⚡ Quick Answer: The Kleenmaid dishwasher error E14 signifies a malfunction related to the water inlet valve, potentially causing issues with water filling. Symptoms m... ✅ DIY Fixable
What Does Error E14 Mean?
The Kleenmaid dishwasher error E14 signifies a malfunction related to the water inlet valve, potentially causing issues with water filling. Symptoms may include the E14 code appearing on the control panel, improper water filling (overfilling or underfilling), or the dishwasher stopping mid-cycle. This error suggests that there may be a problem with the water level sensor or flow meter, as well as other components related to water supply.
Common Symptoms:
- Error code E14 displayed on dishwasher control panel
- Possible incorrect water filling behavior (overfill/underfill)
- Dishwasher may stop mid‑cycle
Possible Causes
- Unverified — possible water level sensor or flow meter issue (low)
- Unverified — possible fault in water fill or water supply components (low)
How to Fix Error E14
DIY Fix Basic checks of water supply and reset
- Ensure the cold water supply tap to the dishwasher is fully open.
- Check inlet hose for kinks or visible blockages.
- Turn off power to dishwasher (unplug or switch off circuit breaker) for 5–10 minutes, then restore and restart.
Technician Only Inspect/replace water level sensor or flow meter
- Disconnect power and water supply.
- Access internal water tank to locate flow meter / water level sensor.
- Check electrical connectors for corrosion or loose contacts.
- Replace sensor/flow meter if found faulty.
Parts needed: Water level sensor (flow meter), Associated wiring harness
- If basic water supply checks and reset do not clear the error.
- If there is any leaking of water or unusual noises indicating internal component failure.
- If you are uncomfortable accessing internal components due to electrical/water hazard.
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E14 error mean on Kleenmaid dishwasher?
E14 indicates a malfunction related to the water inlet valve, affecting water filling.
Can I fix Kleenmaid dishwasher E14 error myself?
Yes, you can perform basic checks on the water supply and reset the dishwasher.
How much does it cost to fix E14 error?
Repair costs vary depending on parts and labor needed to resolve the issue.
When should I call a technician for E14?
Call a technician if basic checks don't resolve the error or if you notice leaks or unusual noises.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!