Kleenmaid Dishwasher Error E13
⚡ Quick Answer: The Kleenmaid dishwasher E13 error indicates a malfunction in the drainage system, which may cause the appliance to stop mid-cycle. Users might notice... ✅ DIY Fixable
What Does Error E13 Mean?
The Kleenmaid dishwasher E13 error indicates a malfunction in the drainage system, which may cause the appliance to stop mid-cycle. Users might notice unusual sounds during operation and may find water remaining in the dishwasher after a wash cycle. To resolve this issue, it's important to check and clean filters, inspect the drain area for debris or blockages, and ensure that the drain hose is free from kinks or obstructions.
Common Symptoms:
- Dishwasher stops mid‑cycle showing E13
- Possible water remaining or incomplete wash (general dishwasher E13 symptoms reported on unrelated brands)
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E13
DIY Fix Basic checks for dishwasher errors
- Turn off and unplug the dishwasher.
- Check and clean filters and drain area for debris or blockages.
- Inspect drain hose for kinks or obstructions.
- Ensure dishwasher is level and there’s no water left standing in tub.
Technician Only Professional inspection if E13 persists
- Refer to the specific Kleenmaid service manual for the exact model to check if E13 is defined in service codes.
- Inspect circulation pump, drain pump, and associated wiring.
- Check control board for communication faults or component failures.
- Use diagnostic tools to determine root cause and replace defective parts as needed.
Parts needed: Drain pump or circulation pump, Control board (if communication fault suspected), Hoses or filters
- If the error persists after basic cleaning and reset attempts
- If there are signs of water leakage or unusual noises
- If water remains inside the dishwasher after a wash cycle
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E13 error mean on Kleenmaid dishwasher?
E13 indicates a drainage system malfunction, causing the dishwasher to stop mid-cycle and possibly leave water inside.
Can I fix Kleenmaid dishwasher E13 error myself?
Yes, you can perform basic checks like cleaning filters, inspecting the drain area for blockages, and checking the drain hose.
How much does it cost to fix E13 error?
Repair costs vary; typical dishwasher pump replacements are moderate, while control board replacements can be higher.
When should I call a technician for E13?
Contact a technician if the error persists after cleaning, if you notice water leakage, or if water remains inside after a cycle.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!