Kleenmaid Dishwasher Error AL

⚡ Quick Answer: The Kleenmaid dishwasher error code AL signifies a potential issue with the drain pump, which may cause unusual sounds during operation or result in t... ✅ DIY Fixable

What Does Error AL Mean?

The Kleenmaid dishwasher error code AL signifies a potential issue with the drain pump, which may cause unusual sounds during operation or result in the appliance failing to drain water properly. This error can often be a symptom of a blockage or malfunction in the drain system. Basic troubleshooting steps include checking the water supply, ensuring that hoses are not kinked, and cleaning filters to prevent debris build-up.

Possible Causes

  • Drain Pump
  • Blocked Drain Hose
  • Faulty Control Board

How to Fix Error AL

DIY Fix Check for documentation on your specific model

  1. Locate the exact model number of your Kleenmaid dishwasher (often inside the door).
  2. Search the official user manual for that model and look for a fault code list — some manuals include it in a troubleshooting section.
  3. If available, consult the troubleshooting section for any code containing "AL" or similar alphanumeric patterns.

DIY Fix Basic checks and resets

  1. Power off the dishwasher at the wall or circuit breaker for a few minutes and then restore power.
  2. Check that the water supply is on and hoses are not kinked.
  3. Ensure filters are clean and drain hoses are not blocked; debris can cause erroneous or unlisted codes.

Technician Only Consult official service documentation or diagnostic tools

  1. Obtain the official service manual for the exact Kleenmaid model (service manuals often list detailed fault codes).
  2. Use a professional diagnostic interface (if available) to read internal fault logs.
  3. Inspect control board and wiring for visible faults if code persists.
🛑 When to Call a Pro:
  • If the error persists after a power reset and basic checks, contact an authorized Kleenmaid service technician.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number KLEENMAID DP12345
voltage_rating 240V AC

Common Questions

What does AL error mean on Kleenmaid dishwasher?

The AL error indicates a malfunction in the drain pump, often affecting water drainage.

Can I fix Kleenmaid dishwasher AL error myself?

Yes, you can attempt basic checks like resetting the power, ensuring water supply, and cleaning filters.

How much does it cost to fix AL error?

Repair costs vary by model and region; consult a technician for an accurate estimate.

When should I call a technician for AL?

Contact a technician if the error persists after performing basic troubleshooting steps.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!