Kenmore Dishwasher Error 2-2

⚡ Quick Answer: The Kenmore Dishwasher error code 2-2 indicates a communication failure between the user interface control and the main electronic control board. User... ✅ DIY Fixable

What Does Error 2-2 Mean?

The Kenmore Dishwasher error code 2-2 indicates a communication failure between the user interface control and the main electronic control board. Users may notice the error displayed on the control panel, and the dishwasher may become unresponsive to button presses. This issue can also lead to unusual noises during operation and hinder proper functioning. Addressing this requires checking wiring and possibly replacing faulty components.

Common Symptoms:

  • Dishwasher displays code 2-2 on control panel
  • Dishwasher may not start or respond to button presses
  • Possible unresponsive buttons despite pressing controls

Possible Causes

  • Communication failure between user interface control board and main electronic control board (high)
  • Loose or damaged wiring between interface board and control board (medium)

How to Fix Error 2-2

DIY Fix Basic checks and reset

  1. Turn off power to the dishwasher at the circuit breaker or unplug it.
  2. Wait 5 minutes to allow capacitors to discharge and the system to reset.
  3. Restore power and try starting a normal cycle to see if the code clears.
  4. Observe if error returns and note when (e.g., immediately at power-on).

Technician Only Inspect wiring and replace faulty boards

  1. Disconnect power to the dishwasher.
  2. Remove access panels to locate the user interface control board and main electronic control board.
  3. Inspect wiring harnesses between the boards for loose connectors, corrosion, or frayed wires.
  4. Repair or replace any damaged wiring harnesses; reseat connectors securely.
  5. If wiring checks good and error persists, replace the user interface control board.
  6. If issue still persists, replace the main electronic control board.

Parts needed: User Interface Control Board, Electronic Control Board, Wiring Harnesses

🛑 When to Call a Pro:
  • If you are uncomfortable opening the dishwasher and working with wiring
  • If the error persists after checking wiring and replacing control boards

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number W10537869
voltage_rating 120V AC

Common Questions

What does 2-2 error mean on Kenmore Dishwasher?

Error 2-2 indicates a communication failure between the user interface control and the main electronic control board.

Can I fix Kenmore Dishwasher 2-2 error myself?

Yes, you can perform basic checks, reset the dishwasher, and inspect the wiring.

How much does it cost to fix 2-2 error?

Estimated repair costs range from $150 to $500+, depending on parts and service rates.

When should I call a technician for 2-2?

Call a technician if you're uncomfortable with wiring or if the error persists after your checks.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!