Kenmore Dishwasher Error E25
⚡ Quick Answer: The Kenmore Dishwasher E25 error indicates a drainage issue, typically involving the drain pump assembly or related components. Symptoms include the d... ✅ DIY Fixable
What Does Error E25 Mean?
The Kenmore Dishwasher E25 error indicates a drainage issue, typically involving the drain pump assembly or related components. Symptoms include the dishwasher stopping mid-cycle, standing water in the tub, and abnormal noises from the drain pump. This error often arises from a clogged drain pump, a loose cover, or a blocked drain hose. Addressing these issues promptly can restore normal operation.
Common Symptoms:
- Dishwasher stops mid‑cycle with E25 displayed
- Standing water remains in the bottom of the tub after the cycle
- Drain pump runs briefly then stops or runs slowly
Possible Causes
- Clogged or blocked drain pump or pump cover (medium)
- Loose drain pump cover (medium)
- Blocked or kinked drain hose/air gap (medium)
How to Fix Error E25
DIY Fix Check and clear visible blockages in drain system
- Turn off power to dishwasher.
- Remove bottom dish rack and locate the drain filter.
- Remove and clean the filter and any visible debris.
- Inspect drain pump cover and ensure it is seated securely.
- Check under sink/air gap for visible blockages.
- Run a short drain cycle to test. “
Technician Only Inspect and potentially replace drain pump and related parts
- Disconnect power and water supply.
- Remove washer to access underside and locate the drain pump.
- Test pump motor and impeller for proper operation.
- Replace damaged or non‑operational drain pump or pump cover.
- Inspect and replace drain hose if kinked or damaged.
- Reassemble and test dishwasher drainage cycles.
Parts needed: Drain pump assembly, Drain pump cover, Drain hose
- If user‑level drain clearing does not resolve E25
- If condsiderable water remains, or pump makes unusual noises after clog clearing
- If internal pump components appear damaged or seized
Next step
Choose the next step for E25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E25 error mean on Kenmore Dishwasher?
E25 indicates a drainage problem, often involving the drain pump or related components.
Can I fix Kenmore Dishwasher E25 error myself?
Yes, you can check for blockages, clean the filter, and clear the drain hose.
How much does it cost to fix E25 error?
Repair costs range from $80 to $250, depending on parts and labor.
When should I call a technician for E25?
Call if blockages are cleared but the issue persists or if the pump makes unusual noises.
Sources & References
- Kenmore dishwasher error codes (community)
- Kenmore Dishwasher Error Codes e15, e24, e25, f2e2, f7e1, ae (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!