Kenmore Dishwasher Error E24
⚡ Quick Answer: The Kenmore Dishwasher E24 error indicates a drainage issue, often resulting in water remaining at the bottom of the unit. This error can cause the di... ✅ DIY Fixable
What Does Error E24 Mean?
The Kenmore Dishwasher E24 error indicates a drainage issue, often resulting in water remaining at the bottom of the unit. This error can cause the dishwasher cycle to stop or pause, with the E24 code displayed. Common causes include a clogged drain filter, a blocked drain hose, or an obstruction in the drain pump impeller.
Common Symptoms:
- Water remains in the bottom of the dishwasher
- Dishwasher cycle stops or pauses mid‑cycle with E24 displayed
- No water being pumped out during drain cycle
Possible Causes
- Clogged drain filter or drain path (medium)
- Blocked or kinked drain hose (medium)
- Obstruction in drain pump impeller (medium)
How to Fix Error E24
DIY Fix Clean drain filter and check drain path
- Turn off and unplug the dishwasher
- Remove the lower rack and locate the drain filter
- Remove and thoroughly clean the filter and filter housing of food debris
- Check visible drain path and remove any obstructions
DIY Fix Inspect and clear drain hose
- Locate the drain hose behind the dishwasher
- Ensure hose is not kinked or twisted
- Disconnect and flush the hose to remove any blockages if comfortable doing so
Technician Only Inspect and service drain pump
- Disconnect dishwasher power and water supply
- Access and remove drain pump assembly
- Check impeller for debris or damage
- Replace drain pump if impeller or motor is faulty
Parts needed: drain pump assembly, gaskets or seals if disturbed
- If after cleaning filters and hoses the error persists
- If drain pump shows signs of electrical or mechanical failure
- If water leakage is observed while attempting repairs
Next step
Choose the next step for E24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E24 error mean on Kenmore Dishwasher?
E24 indicates a drainage issue, often with water remaining in the dishwasher and the cycle pausing.
Can I fix Kenmore Dishwasher E24 error myself?
Yes, you can clean the drain filter and inspect the drain hose for kinks or blockages.
How much does it cost to fix E24 error?
The estimated repair cost for the E24 error ranges from $80 to $200, depending on parts and labor.
When should I call a technician for E24?
Call a technician if cleaning filters and hoses does not resolve the issue or if you notice water leakage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!