Kenmore Dishwasher Error 1-1

⚡ Quick Answer: The Kenmore Dishwasher error code 1-1 indicates a malfunction, typically caused by a stuck relay on the electronic control board. This error may preve... ✅ DIY Fixable

What Does Error 1-1 Mean?

The Kenmore Dishwasher error code 1-1 indicates a malfunction, typically caused by a stuck relay on the electronic control board. This error may prevent the dishwasher from starting or completing cycles, often accompanied by failure to fill or unusual sounds during operation. To resolve this issue, a power reset may be attempted, but inspection and repair of the control board may be necessary.

Common Symptoms:

  • Dishwasher stops and displays code '1-1' or 'F1E1' on control panel
  • Dishwasher may not start or complete cycles when this code is present

Possible Causes

  • Stuck relay on electronic control board (medium)

How to Fix Error 1-1

DIY Fix Power Reset the Dishwasher

  1. Turn off power to the dishwasher at the breaker or unplug it from the mains
  2. Wait at least 5 minutes
  3. Restore power and attempt to run a cycle

Technician Only Inspect and Repair Control Board Wiring or Module

  1. Disconnect power to the dishwasher
  2. Remove access panels to reach the electronic control board
  3. Inspect wiring harness and connectors for damage or loose connections
  4. Test the control board relays with appropriate diagnostic equipment
  5. Replace the electronic control board if relays are confirmed stuck or failed

Parts needed: Electronic control board, Wiring harness/connectors

🛑 When to Call a Pro:
  • If power cycling does not clear the code and the dishwasher still won’t operate
  • If you are not comfortable working with electrical components
  • If inspection reveals damaged wiring or failed electronic parts

Technical Specifications

wattage 15W
component Water Inlet Valve
resistance 3-5 ohms
part_number W10882845
voltage_rating 120V AC

Common Questions

What does 1-1 error mean on Kenmore Dishwasher?

The 1-1 error indicates a stuck relay on the electronic control board, preventing operation.

Can I fix Kenmore Dishwasher 1-1 error myself?

Yes, you can try a power reset by turning off the power for 5 minutes.

How much does it cost to fix 1-1 error?

$100–$350 for control board replacement and labor, varies by model and region.

When should I call a technician for 1-1?

Call a technician if the power reset doesn't work or if you're uncomfortable with electrical components.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!