JennAir Oven Error SAB
⚡ Quick Answer: The JennAir oven SAB error code indicates that the oven is in Sabbath Mode, a setting that disables many controls in observance of Sabbath practices. ... ✅ DIY Fixable
What Does Error SAB Mean?
The JennAir oven SAB error code indicates that the oven is in Sabbath Mode, a setting that disables many controls in observance of Sabbath practices. When this mode is active, the display may show 'SAB' or 'Sabbath', and the oven might ignore user commands except for basic operations. To resolve this, you can disable Sabbath Mode as per your specific model's manual, restoring normal oven functionality.
Common Symptoms:
- Display shows "SAB", "Sabbath", or similar message.
- Oven may remain on in Bake and ignore user input except basic operations.
- No tones or temperature changes displayed; lights/buttons behave differently.
Possible Causes
- Sabbath Mode enabled (high)
How to Fix Error SAB
DIY Fix Exit Sabbath Mode
- Refer to your specific JennAir oven model manual for the exact procedure to disable Sabbath Mode.
- Commonly, press and hold certain buttons (e.g., bake or Sabbath) or navigate the settings menu until Sabbath Mode is turned off.
- After disabling, confirm that the oven returns to normal display and control behavior.
Technician Only Verify Control Setup and Settings
- If user is unable to exit Sabbath Mode, inspect the control panel for stuck buttons or incorrect settings.
- Reference the model-specific service manual to confirm the correct sequence for toggling Sabbath Mode off.
- Test the control board responsiveness after Sabbath Mode is disabled.
Parts needed: Control panel / user interface, Control board (if unresponsive)
- If the oven remains unresponsive after attempting to exit Sabbath Mode
- If other unrelated error codes appear alongside SAB
Next step
Choose the next step for SAB
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does SAB error mean on JennAir oven?
SAB error means the oven is in Sabbath Mode, limiting control functions.
Can I fix JennAir oven SAB error myself?
Yes, you can disable Sabbath Mode by following your model's manual instructions.
How much does it cost to fix SAB error?
Estimated repair costs range from $50 to $200, depending on parts and service.
When should I call a technician for SAB?
Call a technician if the oven remains unresponsive after attempting to exit Sabbath Mode.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!