JennAir Oven Error LOC
⚡ Quick Answer: The JennAir oven error LOC indicates that the control lock feature is activated, rendering the control panel unresponsive. When this feature is engage... ✅ DIY Fixable
What Does Error LOC Mean?
The JennAir oven error LOC indicates that the control lock feature is activated, rendering the control panel unresponsive. When this feature is engaged, the display will show 'LOC,' and pressing any buttons will have no effect. This is a safety feature designed to prevent accidental changes while cooking. To resolve this issue, you can unlock the control panel by ensuring the oven is off and then pressing and holding the START/ENTER button for about five seconds until 'LOC' disappears.
Common Symptoms:
- Display shows ‘LOC’
- Control panel unresponsive
- Keys do nothing when pressed
Possible Causes
- Control Lock feature activated (high)
How to Fix Error LOC
DIY Fix Unlock Control Lock
- Ensure oven and timer are off.
- Press and hold START/ENTER (or specified control lock button) for ~5 seconds until ‘LOC’ disappears.
- Verify that control pad buttons now respond normally.
DIY Fix Power Reset if Control Lock Won’t Clear
- Turn off circuit breaker feeding the oven for ~1 minute.
- Turn the breaker back on.
- Wait ~1 minute to see if the ‘LOC’ clears.
- Test oven controls.
Technician Only Verify Control Lock System Functionality
- Inspect control board for stuck lock logic or failed touchpad.
- Test lock switch/control lock input circuit.
- Replace control panel assembly or control board if faulty.
Parts needed: Control panel / touchpad, Control board
- If control lock cannot be disengaged after power reset and key press attempts
- If oven display is unresponsive or shows additional error codes
- If suspected control board or touchpad failure
Next step
Choose the next step for LOC
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Control Lock Mechanism |
| resistance | |
| part_number | |
| voltage_rating | 120V AC |
Common Questions
What does LOC error mean on JennAir oven?
LOC error indicates the control lock feature is activated, making the control panel unresponsive.
Can I fix JennAir oven LOC error myself?
Yes, you can unlock it by pressing and holding the START/ENTER button for about 5 seconds.
How much does it cost to fix LOC error?
Estimated repair costs range from $150 to $600 depending on parts and service.
When should I call a technician for LOC?
Call a technician if the control lock won't disengage after attempts or if other error codes appear.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!