JennAir Oven Error F1-1
⚡ Quick Answer: The JennAir Oven F1-1 error code indicates a malfunction in the oven's control board, often linked to the temperature sensor or associated wiring. Sym... ✅ DIY Fixable
What Does Error F1-1 Mean?
The JennAir Oven F1-1 error code indicates a malfunction in the oven's control board, often linked to the temperature sensor or associated wiring. Symptoms include an unresponsive control panel, continuous alerts, and inoperative oven functions. This error may reappear even after power resets, suggesting an underlying fault that requires further inspection.
Common Symptoms:
- Error code F1-1 displays on the oven control panel
- Continuous beeping or audible alerts accompanying the error
- Oven functions become inoperative when F1-1 is present
- Error may reappear after power reset
Possible Causes
- Temperature sensor fault or defective sensor/wiring (high)
- Control board or electronic oven control (EOC) failure (medium)
- Faulty keypad/touch panel causing incorrect signals (medium)
How to Fix Error F1-1
DIY Fix Power reset and basic checks
- Turn off the oven at the circuit breaker for 1–5 minutes.
- Restore power and observe if F1-1 disappears.
- Ensure control panel buttons aren’t stuck or unresponsive.
Technician Only Diagnose sensor and control board
- Disconnect power at the breaker.
- Access oven control area and inspect the temperature sensor and wiring harness for damage or loose connections.
- Test the sensor resistance with a multimeter at room temperature.
- Isolate control board and keypad: disconnect keypad ribbon and check if error persists; replace the faulty component accordingly.
Parts needed: Temperature sensor, Electronic Oven Control (EOC) board, Keypad/touch panel
- If you detect burning smell or scorched wiring
- If you are uncomfortable with electrical diagnostics or live voltage work
- If error persists after basic resets and diagnostics
Next step
Choose the next step for F1-1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F1-1 error mean on JennAir Oven?
F1-1 indicates a malfunction in the control board, linked to the temperature sensor or wiring.
Can I fix JennAir Oven F1-1 error myself?
Yes, you can perform a power reset and check for stuck buttons before calling a technician.
How much does it cost to fix F1-1 error?
Estimated repair costs range from $100 to $500+, depending on parts and labor.
When should I call a technician for F1-1?
Call if you smell burning or see scorched wiring, or if the error persists after basic checks.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!