Jennair Dishwasher Error F6E3

⚡ Quick Answer: The JennAir dishwasher F6E3 error indicates a malfunction related to the drain pump, often caused by excessive suds or air trapped in the water system... ✅ DIY Fixable

What Does Error F6E3 Mean?

The JennAir dishwasher F6E3 error indicates a malfunction related to the drain pump, often caused by excessive suds or air trapped in the water system. This error typically prevents the dishwasher from filling or completing its wash cycle, and is accompanied by unusual noises. To resolve this issue, ensure you're using the correct dishwasher detergent and consider running a rinse cycle to eliminate any suds or air present in the system.

Common Symptoms:

  • Dishwasher displays F6E3 error during or after a wash cycle
  • Dishwasher may stop filling or not proceed with the wash cycle when suds/air is sensed
  • Multiple independent sources report association with suds or air in the water pump

Possible Causes

  • Use of incorrect detergent leading to excessive suds (high)
  • Air in the water pump affecting water circulation (medium)

How to Fix Error F6E3

DIY Fix Check and correct detergent usage

  1. Ensure you are using dishwasher‑specific detergent — not hand dish soap, laundry soap, or other non‑dishwasher detergents.
  2. Remove excess suds manually if present — you might need to wipe out the tub and run a rinse cycle with no detergent.
  3. Run a rinse cycle to clear suds and air from the wash system.

DIY Fix Power cycle the dishwasher

  1. Turn off the dishwasher and disconnect power (via wall switch or circuit breaker) for 1–2 minutes.
  2. Restore power and attempt a rinse cycle to clear any residual air or foam.

Technician Only Inspect water pump and air/suds traps

  1. Technician should inspect the dishwasher water circulation pump assembly for air pockets or foam residue.
  2. Check and clear any blockages in the pump inlet/outlet and ensure proper drain and circulation.
  3. Verify correct detergent dispensing and wash system sensors are functioning.

Parts needed: Water circulation pump, Detergent dispenser, Sensing system components

🛑 When to Call a Pro:
  • If the error persists after correcting detergent usage and power cycling.
  • If there are signs of water leakage or unusual noises from the pump area.
  • If multiple error codes appear or the dishwasher fails to start a cycle after troubleshooting.

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-20 ohms
part_number W10712395
voltage_rating 120V AC

Common Questions

What does F6E3 error mean on JennAir dishwasher?

F6E3 indicates a drain pump malfunction due to excessive suds or air in the system.

Can I fix JennAir dishwasher F6E3 error myself?

Yes, check detergent usage, remove excess suds, and power cycle the dishwasher.

How much does it cost to fix F6E3 error?

Repair costs vary between $75 and $300+, depending on the diagnosis and parts needed.

When should I call a technician for F6E3?

Call if the error persists after troubleshooting or if you notice unusual noises or leaks.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!