Jennair Dishwasher Error F2E2

⚡ Quick Answer: The JennAir dishwasher error code F2E2 indicates a communication error between the user interface and the main control board. This malfunction can pre... ✅ DIY Fixable

What Does Error F2E2 Mean?

The JennAir dishwasher error code F2E2 indicates a communication error between the user interface and the main control board. This malfunction can prevent the dishwasher from starting or responding to commands and may cause cycles to cancel unexpectedly. If you hear unusual noises during operation and the machine fails to drain water, this error may be the cause.

Common Symptoms:

  • Dishwasher displays F2E2 code on control panel
  • Dishwasher may not start or respond to button presses
  • Cycles may cancel unexpectedly

Possible Causes

  • Faulty or loose communication connection between user interface and main control board (medium)

How to Fix Error F2E2

DIY Fix Reset dishwasher control

  1. Disconnect dishwasher from power (unplug or turn off breaker) for ~30 seconds
  2. Restore power and attempt to run a cycle

Technician Only Inspect and repair UI-to-control communication

  1. Turn off power at breaker
  2. Remove inner door panel to access UI board and main control board
  3. Inspect ribbon cable between UI and control board for damage or loose connection
  4. Clean connector pins if corroded and firmly reseat cable
  5. Test operation; if issue persists, replace UI board first (most common), then main control board if needed

Parts needed: UI control panel board, Main control board, Ribbon cable/connectors

🛑 When to Call a Pro:
  • If error returns after connector reseating and reset
  • If boards need replacement and user lacks technical experience

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number W10822278
voltage_rating 120V AC

Common Questions

What does F2E2 error mean on JennAir dishwasher?

F2E2 indicates a communication error between the user interface and main control board, preventing operation.

Can I fix JennAir dishwasher F2E2 error myself?

Yes, you can reset the dishwasher by disconnecting power for about 30 seconds and then restoring it.

How much does it cost to fix F2E2 error?

Repair costs typically range from $100 to $500+, depending on parts and labor.

When should I call a technician for F2E2?

Call a technician if the error persists after resetting or if board replacements are needed.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!