Jennair Dishwasher Error F1E1

⚡ Quick Answer: The JennAir dishwasher F1E1 error indicates a water leakage detection issue, causing the appliance to stop operation after initiating the drain sequen... ✅ DIY Fixable

What Does Error F1E1 Mean?

The JennAir dishwasher F1E1 error indicates a water leakage detection issue, causing the appliance to stop operation after initiating the drain sequence. This error is often accompanied by a persistent beeping sound and a flashing error code on the display. It may result from an internal control board relay malfunction or operational faults preventing cycle progression.

Common Symptoms:

  • Dishwasher enters drain sequence then stops operation when F1E1 displays.
  • Error may appear at cycle start or shortly after drain begins.

Possible Causes

  • Internal control board relay malfunction (medium)

How to Fix Error F1E1

DIY Fix Basic Reset and Safe Shutdown

  1. If possible, turn off water supply to the dishwasher.
  2. Turn off power to the unit (unplug or breaker) and wait several minutes.
  3. Press the Cancel key once to silence alarm tones.
  4. Restore power and attempt a new cycle.

Technician Only Control Board and Relay Inspection/Repair

  1. Verify error with diagnostic tools and confirm F1E1 code persists.
  2. Inspect electronic control board for signs of relay sticking, corrosion, burns, or other failure modes.
  3. Test relays and associated wiring harness for continuity and proper function.
  4. Replace the control board or defective relay components if confirmed faulty.

Parts needed: Electronic control board, Relays and connectors on control board

🛑 When to Call a Pro:
  • If the error persists after basic reset and user-level checks
  • If there are signs of water leakage or electrical damage
  • If you are uncomfortable performing control board diagnostics

Technical Specifications

wattage 1500W
component Leak Sensor
resistance 10-20 ohms
part_number W10619951
voltage_rating 120V AC

Common Questions

What does F1E1 error mean on JennAir dishwasher?

F1E1 indicates a water leakage detection issue, stopping operation after the drain sequence begins.

Can I fix JennAir dishwasher F1E1 error myself?

Yes, try resetting the dishwasher by turning off power and water supply, then canceling the alarm.

How much does it cost to fix F1E1 error?

Repair costs range from $150 to $450+, depending on parts and labor.

When should I call a technician for F1E1?

Call a technician if the error persists after a reset, or if you see water leakage or electrical damage.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!