Jennair Dishwasher Error E6

⚡ Quick Answer: The Jennair dishwasher error code E6 indicates a failure in the drain pump, often resulting in improper draining and may be accompanied by unusual noi... ✅ DIY Fixable

What Does Error E6 Mean?

The Jennair dishwasher error code E6 indicates a failure in the drain pump, often resulting in improper draining and may be accompanied by unusual noises during operation. This error typically points to a general fault within the system, suggesting a need for service or a reset of the control system.

Common Symptoms:

  • Error code E6 displayed on control panel

Possible Causes

  • Unknown specific fault (code displayed without detailed official explanation) (high)
  • Communication or control-related issue (community interpretation) (medium)

How to Fix Error E6

DIY Fix Cycle power to reset control

  1. Turn off power to dishwasher by unplugging unit or switching off breaker.
  2. Wait 30–60 seconds.
  3. Restore power and check if error persists.

Technician Only Check control board and wiring connections

  1. Disconnect power to dishwasher.
  2. Access the control board and inspect connectors for secure seating and corrosion.
  3. Test communication between control panel and main control board per service manual.
  4. Replace control board or panel if diagnosed as faulty.

Parts needed: control board, control panel, wire harness

🛑 When to Call a Pro:
  • If resetting power does not clear error.
  • If control board diagnostics show faults or communication errors.
  • If visible wiring or connector damage is present.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number W10822605
voltage_rating 120V AC

Common Questions

What does E6 error mean on jennair dishwasher?

E6 indicates a drain pump failure, causing improper draining and unusual noises.

Can I fix jennair dishwasher E6 error myself?

Yes, you can try resetting the dishwasher by cycling the power.

How much does it cost to fix E6 error?

Estimated repair costs range from $150 to $500 depending on the issue.

When should I call a technician for E6?

Call a technician if the reset doesn't work or if you notice wiring damage.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!