Indesit Washing Machine Error F13

⚡ Quick Answer: The Indesit Washing Machine F13 error code indicates a malfunction in the dryer temperature sensor, which can prevent the drying function from startin... ✅ DIY Fixable

What Does Error F13 Mean?

The Indesit Washing Machine F13 error code indicates a malfunction in the dryer temperature sensor, which can prevent the drying function from starting or cause it to stop prematurely. This issue may also lead to the machine halting mid-cycle when temperature sensing is required. Possible causes include a faulty temperature sensor or damaged wiring connected to it. Addressing this error may involve basic troubleshooting or replacement of the sensor.

Common Symptoms:

  • F13 displayed on control panel during cycle or when attempting drying function
  • Drying function does not start or stops prematurely
  • Machine may stop mid‑cycle when temperature sensing is expected

Possible Causes

  • Faulty dryer temperature sensor (NTC or equivalent) (medium)
  • Broken or open/shorted wiring to temperature sensor (medium)

How to Fix Error F13

DIY Fix Basic Restart and Reset

  1. Unplug the washing machine from mains power.
  2. Wait at least 5–10 minutes to allow the control board to reset.
  3. Plug the machine back in and attempt a cycle to see if F13 clears.

Technician Only Diagnose and Replace Faulty Temperature Sensor

  1. Disconnect mains power.
  2. Access the dryer/heater assembly per model service manual.
  3. Inspect and test the temperature sensor (NTC) with a multimeter for open/short circuits.
  4. Check wiring harness and connectors for continuity and secure connection.
  5. Replace the temperature sensor if faulty.
  6. Reassemble and test operation.

Parts needed: Dryer temperature sensor, Wiring harness/connectors (if damaged)

🛑 When to Call a Pro:
  • If error persists after basic reset and sensor checks
  • If internal wiring appears damaged or inaccessible
  • If the dryer/heater assembly requires professional disassembly

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-10 ohms
part_number C00253225
voltage_rating 240V AC

Common Questions

What does F13 error mean on Indesit Washing Machine?

F13 indicates a dryer temperature sensor fault, affecting the drying function.

Can I fix Indesit Washing Machine F13 error myself?

Yes, try unplugging the machine for 5-10 minutes to reset it.

How much does it cost to fix F13 error?

Repair costs are moderate, as sensor parts are typically lower-cost, but labor may vary.

When should I call a technician for F13?

Call a technician if the error persists after a reset or if wiring appears damaged.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!