Indesit Washing Machine: not starting

Possible Causes

Power supply issues

How to Identify: Machine has no lights or display, other devices do not work on same outlet, breaker may be tripped.

Part: Power cord, outlet, circuit breaker

Door interlock or latch failure

How to Identify: Door does not click securely, machine refuses to start though power present.

Part: Door interlock/lid switch

Control board or control panel malfunction

How to Identify: Display unresponsive, reset/power cycle doesn’t help, buttons behave erratically.

Part: Electronic control board/panel

Internal component burn (varistor, fuse, on/off button)

How to Identify: Machine remains dead after power and door checks; visible burnt elements upon panel removal.

Part: Internal microcircuit components

DIY Solutions

Check power supply and reset machine

Easy 10 minutes

Tools Needed: none

1. Ensure machine is plugged fully into outlet.
2. Test outlet with another device or reset circuit breaker.
3. Unplug machine for 3–5 minutes and plug back in to reset internal electronics.

⚠️ Safety First: Do not touch electrical components with wet hands.

Ensure door interlock engages

Easy 5 minutes

Tools Needed: none

1. Open and close the door firmly until it clicks.
2. Check for laundry caught in door seal blocking closure.
3. Try starting cycle again.

Next step

Choose the next step for not starting

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Power Cord

Supplies mains power to the appliance and includes the model-specific plug and terminal connection.

Typical part-only price

$15 - $70

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Door or Lid Switch

Detects whether the appliance door or lid is safely closed before operation.

$15 - $55 · Medium · 20-45 mins

Check fit & price

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace faulty door interlock or latch

Estimated Cost: $30 - $100

Control board diagnostic and replacement

Estimated Cost: $150 - $350

When to Call a Professional

No lights or sounds after checking power and door

Burnt smell or visible damage inside electronics

Repeated breaker trips when machine plugged in

Preventive Maintenance

• Periodically test outlet and power cord condition: Power delivery related no start issues
  Frequency: annually
• Check and clean door latch area: Door interlock failure stopping start
  Frequency: monthly

Frequently Asked Questions

Why is my Indesit Washing Machine not starting?

Common causes include power supply issues, a faulty door interlock, or control board malfunctions.

How do I fix Indesit Washing Machine not starting myself?

Check the power supply, ensure the door interlock engages, and reset the machine by unplugging it for a few minutes.

How much does it cost to fix not starting?

Professional repairs can range from $30 to $100 for a door interlock replacement, or $150 to $350 for control board diagnostics and replacement.

When should I call a technician for not starting?

Contact a technician if DIY troubleshooting fails or if you suspect a complex issue such as control board malfunction.

References & Sources

• How to reset Indesit washing machines Community

Common Issues Reported by Users

• Door lock failure (1 mentions)
• Resistor failure (1 mentions)

User Suggested Solutions

1. Replace the door lock assembly

Community Discussions

door lock LED not lighting up, cycle not starting

Replace the door lock assembly.

DIY View on Reddit →

Source: Reddit r/appliancerepair