Indesit Washing Machine Error F08
⚡ Quick Answer: The Indesit Washing Machine F08 error indicates a heating circuit fault, often linked to the motor drive unit malfunction. This may manifest as the ma... ✅ DIY Fixable
What Does Error F08 Mean?
The Indesit Washing Machine F08 error indicates a heating circuit fault, often linked to the motor drive unit malfunction. This may manifest as the machine failing to heat water, resulting in inadequate washing. Common symptoms include the F08 error code displayed, the washer filling but stopping without heating, and the drum tumbling without properly heating the water. Potential causes include a faulty heating element, heater relay/control PCB faults, or issues with the temperature sensor or pressure switch.
Common Symptoms:
- Error code F08 displayed or LEDs flashing 8 times during wash cycle
- Washer fills and may start but stops without heating water
- Drum may tumble but water doesn’t heat up
Possible Causes
- Faulty heating element (medium)
- Heater relay/control PCB fault (medium)
- Faulty NTC/temperature sensor (medium)
- Pressure switch or water level sensing issue (medium)
How to Fix Error F08
DIY Fix Basic power reset
- Turn off and unplug the washing machine from the mains.
- Wait for 2–5 minutes to clear residual power.
- Plug the machine back in and restart a short cycle to see if the error clears.
Technician Only Inspect and replace heating system components
- Disconnect power and access the back panel of the washer.
- Test continuity of the heating element and NTC sensor with a multimeter; replace if faulty.
- Inspect the heater relay section of the control PCB for signs of failure or burn marks; replace PCB if necessary.
- Check pressure switch wiring and correct operation; repair or replace as needed.
Parts needed: Heating element, Temperature (NTC) sensor, Control PCB (heater relay section), Pressure switch
- If the error reappears after a basic reset
- If you find signs of electrical damage, corrosion, or burnt components
- If you are not comfortable performing electrical tests safely
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 200W |
|---|---|
| component | Motor Drive Unit |
| resistance | 1-5 ohms |
| part_number | C00278990 |
| voltage_rating | 230V AC |
Common Questions
What does F08 error mean on Indesit Washing Machine?
F08 indicates a heating circuit fault, causing the washer to stop without heating water.
Can I fix Indesit Washing Machine F08 error myself?
Yes, you can try a basic power reset by unplugging and restarting the machine.
How much does it cost to fix F08 error?
Repair costs range from €50 to €300+, depending on the needed parts and labor.
When should I call a technician for F08?
Call a technician if the error persists after a reset, or if you notice electrical damage.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!