Hoover Dryer Error E20
⚡ Quick Answer: The Hoover dryer error code E20 indicates a potential malfunction, possibly related to the heating element, leading to a lack of heat during the dryin... ✅ DIY Fixable
What Does Error E20 Mean?
The Hoover dryer error code E20 indicates a potential malfunction, possibly related to the heating element, leading to a lack of heat during the drying cycle. While this error code is primarily associated with drainage issues in Hoover washing machines, if displayed on a dryer, it suggests that the unit may require a thorough inspection. Users should verify the model and consult the user manual or Hoover support for specific guidance.
Common Symptoms:
- Disruption of normal cycle or immediate stop with E20 displayed
- Water drainage failure
Possible Causes
- Heating Element
- Thermal Fuse
How to Fix Error E20
DIY Fix Verify model applicability and consult documentation
- Check the exact model number of your Hoover dryer to confirm whether this code applies to that model.
- Refer to the official user manual or Hoover’s support site for that specific dryer model.
- If the manual cannot be found online, contact Hoover customer support and reference E20.
Technician Only Professional diagnosis
- Use appropriate diagnostic tools to read error log on the dryer’s control board if available.
- Inspect any possible condensation water management systems (e.g., pump, tank) if the dryer is a condenser or heat‑pump type.
- Cross‑reference the error code with service documentation specific to the dryer’s control board.
- If the error persists after confirming the code meaning with Hoover support.
- If any part of the dryer exhibits unusual noises, smells, or overheating.
Next step
Choose the next step for E20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2800W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Hoover 35601012 |
| voltage_rating | 240V AC |
Common Questions
What does E20 error mean on hoover dryer?
Error E20 indicates a possible heating element malfunction, leading to no heat during drying.
Can I fix hoover dryer E20 error myself?
Yes, verify your model and consult the user manual or Hoover support for assistance.
How much does it cost to fix E20 error?
Repair costs vary by model and region; consult a technician for an estimate.
When should I call a technician for E20?
Call a technician if the error persists after troubleshooting or if you notice unusual noises or overheating.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!