Hoover Dryer Error E14
⚡ Quick Answer: The Hoover dryer error E14 signifies a fault in the rear NTC temperature sensor, which is responsible for monitoring airflow and moisture levels. This... ✅ DIY Fixable
What Does Error E14 Mean?
The Hoover dryer error E14 signifies a fault in the rear NTC temperature sensor, which is responsible for monitoring airflow and moisture levels. This malfunction often leads to the dryer failing to generate heat, causing it to stop mid-cycle or engage overheating protection. Addressing this issue typically involves sensor replacement to restore proper function.
Common Symptoms:
- Dryer displays E14 on the digital panel
- Dryer may stop heating or fail to complete cycle
- Possible overheating protection engagement due to sensor failure
Possible Causes
- Rear NTC temperature sensor failure (medium)
How to Fix Error E14
DIY Fix Basic checks before service
- Disconnect the dryer from mains power for safety.
- Ensure lint filters and airflow pathways are clean (clear blockages).
- Power the dryer back on and check if the error persists.
Technician Only Replace rear NTC temperature sensor
- Disconnect power and access internal components of the dryer.
- Locate the rear NTC temperature sensor at the rear of the dryer drum housing.
- Test the sensor with a multimeter for open/short circuits.
- Replace the sensor if faulty and reassemble the dryer.
- Test the dryer to confirm E14 is cleared.
Parts needed: Rear NTC temperature sensor, Any gasket/seal associated with sensor
- If you are not comfortable accessing internal components
- If replacing the sensor does not clear the error
- If other electrical faults are present (burn marks, wiring damage)
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Hoover 40004001 |
| voltage_rating | 240V AC |
Common Questions
What does E14 error mean on Hoover dryer?
E14 indicates a malfunction in the rear NTC temperature sensor, affecting heat production.
Can I fix Hoover dryer E14 error myself?
Yes, you can perform basic checks like cleaning filters and resetting the dryer. If the error persists, sensor replacement may be required.
How much does it cost to fix E14 error?
Repair costs for the E14 error are medium, depending on the region and whether you need to replace the sensor.
When should I call a technician for E14?
Call a technician if you're uncomfortable accessing internal components, if replacing the sensor doesn't resolve the error, or if you notice other electrical issues.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!