Hoover Dryer Error E13
⚡ Quick Answer: The Hoover dryer error code E13 indicates a malfunction in the heating element or temperature sensing circuit. This issue can prevent the dryer from h... ✅ DIY Fixable
What Does Error E13 Mean?
The Hoover dryer error code E13 indicates a malfunction in the heating element or temperature sensing circuit. This issue can prevent the dryer from heating properly, resulting in either early cycle termination or failure to generate heat. On heat pump models, the error may also signify potential faults within the heat pump system, such as issues with the NTC sensor or compressor.
Common Symptoms:
- Dryer stops early or will not heat
- Error displayed immediately or after a short time into cycle
- Possible lack of proper temperature regulation or compressor start failures
Possible Causes
- Temperature sensor (NTC) fault or open/short circuit (medium)
How to Fix Error E13
DIY Fix Basic checks before professional service
- Unplug dryer from mains power.
- Ensure lint filters, condenser unit (if present), and air pathways are clean and unobstructed.
- Restart the dryer to see if error persists after cleaning.
Technician Only Diagnose temperature sensing and heat pump components
- Verify NTC/temperature sensor continuity and resistance per manufacturer specifications.
- Inspect wiring harnesses and connectors for the temperature sensor and control board connections.
- For heat pump models, test whether the compressor starts and verify correct operation of heat pump fan and pressure/temperature sensors.
- Replace defective NTC sensor or heat pump component as confirmed by electrical testing.
Parts needed: NTC/temperature sensor, Wiring harness/connectors, Heat pump compressor and fan (heat pump models)
- If the error persists after basic cleaning and reset.
- If electrical testing indicates open/short or failed components.
- If heat pump compressor does not operate correctly on heat pump models.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-15 ohms |
| part_number | Hoover 40001234 |
| voltage_rating | 240V AC |
Common Questions
What does E13 error mean on Hoover dryer?
E13 indicates a malfunction in the heating element or temperature sensing circuit, causing heating issues.
Can I fix Hoover dryer E13 error myself?
Yes, you can perform basic checks like cleaning filters and resetting the dryer before seeking professional help.
How much does it cost to fix E13 error?
Repair costs for E13 can range from $50 to $300+, depending on the specific parts and model.
When should I call a technician for E13?
Call a technician if the error persists after cleaning and resetting, or if electrical testing reveals component failures.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!