Hoover Dryer Error E16
⚡ Quick Answer: The Hoover dryer E16 error code indicates a fault in the program selector, preventing the dryer from responding to cycle selections. Symptoms include ... ✅ DIY Fixable
What Does Error E16 Mean?
The Hoover dryer E16 error code indicates a fault in the program selector, preventing the dryer from responding to cycle selections. Symptoms include an unresponsive control panel and a loose or damaged program selector knob. This issue may stem from a faulty rotary program selector switch or issues with the control board misinterpreting inputs.
Common Symptoms:
- Dryer displays E16 on control panel
- Dryer may not start or respond to cycle selections
- Program selector knob feels loose or unresponsive
Possible Causes
- Faulty rotary program selector switch or associated contacts (medium)
- Control board misinterpreting selector input due to worn contacts or PCB fault (low)
How to Fix Error E16
DIY Fix Check and clean the program selector
- Unplug the dryer from power.
- Inspect the program selector knob for physical damage or looseness.
- If accessible without disassembly, ensure the knob is seated properly on its shaft.
- For advanced users: remove the control panel per your model’s manual to access the selector contacts and clean them with electrical contact cleaner.
Technician Only Replace program selector switch and diagnose control board
- Unplug the dryer from all power.
- Remove the control panel per manufacturer instructions.
- Test the rotary selector switch for continuity across positions.
- Replace the faulty selector switch with a genuine or equivalent part.
- Verify control board signage and wiring continuity from selector to PCB.
- If the selector switch replacement does not clear E16, test the control board for faults and replace/repair as necessary.
Parts needed: Rotary selector switch, Control board (if needed)
- If the E16 continues after selector switch replacement
- If there are signs of control board damage (burn marks, smell, component failure)
- If the user is uncomfortable performing electrical diagnostics
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Hoover 40000729 |
| voltage_rating | 240V AC |
Common Questions
What does E16 error mean on hoover dryer?
The E16 error means there's a fault in the program selector, causing the dryer to be unresponsive.
Can I fix hoover dryer E16 error myself?
Yes, you can check and clean the program selector knob for damage and ensure it's properly seated.
How much does it cost to fix E16 error?
Repair costs range from $30 to $200+, depending on parts and labor.
When should I call a technician for E16?
Call a technician if the error persists after a selector switch replacement or if there's control board damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!