Hoover Dryer Error E05
⚡ Quick Answer: The Hoover dryer E05 error code indicates a malfunction in the temperature sensing circuit, often due to a faulty or open NTC temperature sensor or is... ✅ DIY Fixable
What Does Error E05 Mean?
The Hoover dryer E05 error code indicates a malfunction in the temperature sensing circuit, often due to a faulty or open NTC temperature sensor or issues with the related wiring. This can lead to the dryer failing to produce heat and stopping the cycle shortly after it begins. Regularly checking these components can help maintain dryer functionality.
Common Symptoms:
- Dryer stops cycle and displays E05
- Dryer may fail to heat or register temperature
- Error appears soon after cycle start or when temperature is sensed
Possible Causes
- Faulty front NTC temperature sensor (medium)
- Damaged or loose wiring to the NTC sensor (medium)
- Control board misinterpretation due to sensor circuit issues (low)
How to Fix Error E05
DIY Fix Basic checks for E05 on Hoover dryer
- Ensure dryer is unplugged before inspection
- Clean lint filters and check for excessive lint buildup around sensor areas
- Visually inspect wiring harness to NTC sensor for obvious damage
- Power the machine and see if error persists after basic checks
Technician Only Diagnose and repair NTC sensor circuit
- Disconnect power and remove dryer front panel to access the NTC sensor
- Measure NTC sensor resistance at room temperature — compare with expected values for the model
- Inspect wiring continuity from NTC sensor to control board
- Replace NTC sensor if out of spec
- If NTC and wiring are good but error persists, test or replace control board
Parts needed: NTC temperature sensor, Wiring harness, Control board (if necessary)
- If you are not comfortable accessing internal electrical components
- If replacing the NTC and checking wiring does not clear the error
Next step
Choose the next step for E05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Hoover 40000424 |
| voltage_rating | 240V AC |
Common Questions
What does E05 error mean on Hoover dryer?
E05 indicates a malfunction in the temperature sensing circuit, often due to a faulty NTC sensor.
Can I fix Hoover dryer E05 error myself?
Yes, you can check the NTC sensor and wiring for damage after ensuring the dryer is unplugged.
How much does it cost to fix E05 error?
The estimated repair cost ranges from $30 to $300+, depending on parts and labor.
When should I call a technician for E05?
Call a technician if you're uncomfortable accessing electrical components or if repairs do not resolve the error.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!