Hisense Oven Error ERR002
⚡ Quick Answer: The Hisense oven error code ERR002 indicates a malfunction with the meat probe function. This error usually arises when the meat probe is either disco... ✅ DIY Fixable
What Does Error ERR002 Mean?
The Hisense oven error code ERR002 indicates a malfunction with the meat probe function. This error usually arises when the meat probe is either disconnected or has a fault in its circuit, preventing the oven from utilizing the meat probe feature. Users may experience a flashing display or an inability to use the meat probe function until the issue is resolved. Checking the probe's connection and cleaning its contacts may help clear the error.
Common Symptoms:
- Error appears when trying to use the meat probe function
- Meat probe function cannot be used until error is cleared
Possible Causes
- Disconnected or faulty meat probe (high)
- Short on meat probe circuit or UI wiring related to probe (medium)
How to Fix Error ERR002
DIY Fix Check Meat Probe Connection and Clean Contacts
- Ensure the oven is turned off and cool before inspecting.
- Remove the meat probe from its storage location.
- Inspect the probe plug and socket for debris or contamination.
- Reconnect the meat probe firmly into its socket.
Technician Only Diagnose Meat Probe Circuit and Replace Faulty Components
- Disconnect the oven from mains power.
- Use a multimeter to measure the resistance between meat probe pins; verify it matches expected values.
- Inspect the wiring between the meat probe socket and control board for opens/shorts.
- Replace the meat probe sensor if found defective.
- If wiring and probe are good, test and replace the user interface or power board as needed.
Parts needed: Meat probe sensor, Meat probe connector/wiring, User interface board, Power/control board
- If the error persists after reconnecting the meat probe securely
- If internal wiring or board diagnostics indicate faults beyond simple probe issues
- If user is uncomfortable performing electrical diagnostics
Next step
Choose the next step for ERR002
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | HIS-HEAT-001 |
| voltage_rating | 240V AC |
Common Questions
What does ERR002 error mean on hisense oven?
ERR002 indicates a malfunction in the meat probe, preventing its use.
Can I fix hisense oven ERR002 error myself?
Yes, check the meat probe connection and clean its contacts.
How much does it cost to fix ERR002 error?
Repair costs range from ¥5,000 to ¥30,000+ depending on parts and labor.
When should I call a technician for ERR002?
Call a technician if the error persists after reconnecting the probe or if you're uncomfortable with diagnostics.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!