Hisense Oven Error E01
⚡ Quick Answer: The Hisense oven error code E01 typically indicates a malfunction related to the temperature sensor, which can lead to erratic temperature readings or... ✅ DIY Fixable
What Does Error E01 Mean?
The Hisense oven error code E01 typically indicates a malfunction related to the temperature sensor, which can lead to erratic temperature readings or a failure to heat properly. If you see this error after attempting to start cooking, it may require further investigation to determine the exact cause, which could involve checking the sensor and its connections.
Common Symptoms:
- Display shows E01 after attempting to start cooking
- Oven may stop heating or fail to reach temperature
Possible Causes
- Temperature Sensor
- Wiring Issues
How to Fix Error E01
DIY Fix Basic Verification and Safety
- Turn off and disconnect the oven from mains power for at least 5 minutes.
- Check the oven door is fully closed and latched before restarting.
- Attempt to power on the oven again and observe if E01 persists.
Technician Only Check Temperature Sensor and Connections
- Disconnect power at the breaker and verify no voltage is present.
- Inspect the internal temperature sensor (NTC/thermistor) and its wiring for damage or loose connectors.
- Measure the sensor resistance with a multimeter (if available) to check for open/short conditions.
- Inspect wiring harness and control board connections for signs of heat damage or loose pins.
Parts needed: temperature sensor (NTC probe), wiring harness
- If E01 reappears after power cycling and basic user checks.
- If any inspection reveals damage to wiring, heating elements, or sensors.
- If you are unable to safely disconnect and test components yourself.
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000 ohms |
| part_number | HISENSE-TS-001 |
| voltage_rating | 120V AC |
Common Questions
What does E01 error mean on Hisense oven?
E01 indicates a potential malfunction in the temperature sensor, causing heating issues.
Can I fix Hisense oven E01 error myself?
Yes, you can try power cycling the oven and ensuring the door is properly closed.
How much does it cost to fix E01 error?
Repair costs range from ¥5,000 to ¥15,000, depending on the sensor and labor.
When should I call a technician for E01?
Call a technician if the error persists after basic checks or if you see damage to components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!