Hisense Oven Error ERR001

⚡ Quick Answer: The Hisense oven error code ERR001 signals a malfunction related to the PT1000 temperature sensor, leading to improper heating and potentially unsafe ... ⚠️ Difficulty Varies

What Does Error ERR001 Mean?

The Hisense oven error code ERR001 signals a malfunction related to the PT1000 temperature sensor, leading to improper heating and potentially unsafe temperature readings. This error often prevents the oven from operating, particularly during baking or self-cleaning functions. If the sensor is disconnected or short-circuited, the oven may shut down or report extreme temperature conditions, necessitating troubleshooting or replacement of the sensor.

Common Symptoms:

  • Oven stops heating or shuts down when ERR001 appears
  • Self‑clean or baking functions unavailable until error is cleared
  • Temperature detected above safe thresholds or sensor circuit disconnection detected

Possible Causes

  • PT1000 temperature sensor disconnected or short circuit (high)
  • PT1000 sensor reports over‑temperature beyond allowed limits (high)

How to Fix Error ERR001

DIY Fix Power cycle and basic checks

  1. Power off the oven at the breaker or unplug it for at least 5 minutes
  2. Attempt to restart the oven to see if error clears
  3. Ensure oven door is fully closed and control panel keys are responsive

Technician Only Inspect and test PT1000 temperature sensor and circuit

  1. Access oven internal control area and locate PT1000 temperature sensor
  2. Measure resistance of PT1000 at room temperature to verify open or short conditions per service manual specs
  3. Inspect sensor wiring harness for damage, disconnection, or shorts
  4. Replace PT1000 sensor if out of specification
  5. Verify correct operation and ensure proper readings under controlled temperature conditions

Parts needed: PT1000 temperature sensor, sensor wiring harness, possible connectors or terminals

🛑 When to Call a Pro:
  • If error persists after sensor tests and replacement
  • If there is evidence of control board damage or wiring harness faults beyond simple sensor failure
  • If you are not qualified to safely access oven internal components

Next step

Choose the next step for ERR001

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply
Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number HIS-HEAT-001
voltage_rating 240V AC

Common Questions

What does ERR001 error mean on hisense oven?

ERR001 indicates a malfunction with the PT1000 temperature sensor, affecting heating and temperature stability.

Can I fix hisense oven ERR001 error myself?

Yes, you can try power cycling the oven and ensuring the door is closed. However, sensor testing may require a technician.

How much does it cost to fix ERR001 error?

Repair costs range from $40 to $150, depending on the sensor and labor required.

When should I call a technician for ERR001?

Call a technician if the error persists after sensor checks or if there's potential control board damage.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318