Haier Dishwasher Error ED
⚡ Quick Answer: The Haier dishwasher ED error code indicates a potential door lock or latch malfunction. This issue may cause the dishwasher to stop mid-cycle or fail... ✅ DIY Fixable
What Does Error ED Mean?
The Haier dishwasher ED error code indicates a potential door lock or latch malfunction. This issue may cause the dishwasher to stop mid-cycle or fail to start if the door is not securely closed. To resolve the problem, check that the door is fully latched and try restarting the unit. If the error persists, further inspection of the door latch assembly may be necessary.
Common Symptoms:
- Dishwasher stops mid‑cycle with the display showing "ED"
- Dishwasher may not start or may abort cycle when door is not properly secured
Possible Causes
- Door latch or door lock not properly engaged (low)
How to Fix Error ED
DIY Fix Check and secure the dishwasher door
- Ensure the dishwasher door is fully closed and latched.
- Open the door and then close it again firmly.
- Try restarting the dishwasher after confirming the door is properly latched.
Technician Only Inspect or replace door latch/lock assembly
- Disconnect power to the dishwasher for safety.
- Inspect the door latch and lock mechanism for wear or damage.
- Test the door switch and associated wiring for continuity with a multimeter.
- Replace faulty door latch or door lock assembly as needed.
Parts needed: Door latch assembly, Door lock sensor/switch
- If the "ED" error persists after confirming the door is properly closed
- If the door latch appears broken or will not engage securely
- If other error codes appear concurrently or the dishwasher exhibits additional faults
Next step
Choose the next step for ED
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-15 ohms |
| part_number | Haier 0061200053 |
| voltage_rating | 120V AC |
Common Questions
What does ED error mean on haier dishwasher?
The ED error indicates a problem with the door lock or latch, causing the dishwasher to stop mid-cycle.
Can I fix haier dishwasher ED error myself?
Yes, check and secure the dishwasher door to ensure it is fully closed and latched.
How much does it cost to fix ED error?
The estimated repair cost for the ED error is between ¥3,000 and ¥10,000, including parts and labor.
When should I call a technician for ED?
Call a technician if the ED error persists after securing the door or if the latch is broken.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!