Haier Dishwasher Error E5

⚡ Quick Answer: The Haier dishwasher error code E5 indicates a malfunction related to water supply or filling. This often results in insufficient water entering the d... ✅ DIY Fixable

What Does Error E5 Mean?

The Haier dishwasher error code E5 indicates a malfunction related to water supply or filling. This often results in insufficient water entering the dishwasher, causing it to stop shortly after starting. Users may also notice unusual noises during operation or flashing lights indicating the error. Common causes include a blocked or kinked water inlet hose or a clogged inlet filter.

Common Symptoms:

  • Dishwasher may stop shortly after starting
  • No water enters the tub or insufficient water detected
  • Error code E5 is shown / flashing lights corresponding to error

Possible Causes

  • Insufficient water entering the dishwasher due to inlet/filling problems (medium)
  • Blocked or kinked water inlet hose or clogged inlet filter (medium)

How to Fix Error E5

DIY Fix Check water supply and inlet connections

  1. Ensure the household water supply to the dishwasher is turned fully on.
  2. Inspect the water inlet hose for kinks, bends, or crushing, and straighten if necessary.
  3. Turn off water supply and disconnect the inlet hose at both ends.
  4. Clean any filter screens at the water inlet valve and hose connections.
  5. Reconnect and test run the dishwasher.

Technician Only Test and service water inlet valve and pressure

  1. Measure water pressure at the inlet to ensure it meets manufacturer specifications.
  2. Check electrical supply to the water inlet valve; verify that the valve actuates when a cycle starts.
  3. Replace a defective water inlet solenoid valve if it fails to open/close properly.
  4. Inspect internal water level sensors and flow meter for faults.

Parts needed: Water inlet solenoid valve, Water inlet hose/filter assembly, Pressure/flow sensor

🛑 When to Call a Pro:
  • If the error persists after checking water supply and cleaning inlet filters/hoses.
  • If there is visible leakage or the unit fills incorrectly.
  • If internal components such as the inlet valve or sensors appear to be faulty.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number Haier 0061000000
voltage_rating 120V AC

Common Questions

What does E5 error mean on haier dishwasher?

E5 error indicates a water supply issue, often due to insufficient water entering the dishwasher.

Can I fix haier dishwasher E5 error myself?

Yes, check water supply, inspect the inlet hose for kinks, and clean the inlet filter.

How much does it cost to fix E5 error?

Repair costs range from ¥5,000 to ¥20,000+, depending on parts and labor.

When should I call a technician for E5?

Call a technician if the error persists after DIY checks or if you notice leakage.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!