Haier Dishwasher Error EC
⚡ Quick Answer: The Haier dishwasher EC error code indicates a potential malfunction in the drain pump. This issue may result in unusual noises during operation and p... ✅ DIY Fixable
What Does Error EC Mean?
The Haier dishwasher EC error code indicates a potential malfunction in the drain pump. This issue may result in unusual noises during operation and prevent the dishwasher from draining water properly. To address this error, first ensure the dishwasher is powered on and the display is functioning. If the EC code persists, a reset may help; turn off the unit, disconnect it from power for a few minutes, and then restart. If the problem continues, contacting Haier support is recommended for professional assistance.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error EC
DIY Fix Verify basic conditions and reset
- Ensure the dishwasher is properly powered and the display is legible.
- Turn off the dishwasher and disconnect it from power for a few minutes, then reconnect and restart to see if the code clears.
- Check for any other displayed lights or beeps that might accompany the EC code.
Technician Only Contact Haier Service for exact meaning
- Provide the exact model number and error display to Haier authorized support.
- Have the technician reference official service documentation or diagnostic tools to interpret the EC code.
- Inspect internal sensors, control board, or UI display if directed by official diagnostics.
- If the EC code persists after a reset and basic checks, contact Haier support.
Next step
Choose the next step for EC
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Haier 00610438 |
| voltage_rating | 120V AC |
Common Questions
What does EC error mean on Haier dishwasher?
The EC error indicates a malfunction in the drain pump, often leading to unusual noises and failure to drain.
Can I fix Haier dishwasher EC error myself?
Yes, you can try resetting the dishwasher by turning it off and disconnecting power for a few minutes.
How much does it cost to fix EC error?
Repair costs vary and typically include a service call and diagnostics.
When should I call a technician for EC?
If the EC code remains after a reset and basic checks, it’s best to contact Haier support for assistance.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!