Haier Dishwasher Error E10

⚡ Quick Answer: The Haier dishwasher E10 error indicates a water inlet problem, typically caused by insufficient water supply or a clogged inlet hose. This can preven... ✅ DIY Fixable

What Does Error E10 Mean?

The Haier dishwasher E10 error indicates a water inlet problem, typically caused by insufficient water supply or a clogged inlet hose. This can prevent the dishwasher from filling with water, leading to halted cycles. To resolve this issue, check the water supply, ensure the hose is clear of blockages, and inspect the inlet valve for functionality.

Common Symptoms:

  • Dishwasher stops shortly after starting with code E10
  • Dishwasher does not fill with water or fills very slowly
  • Dishwasher cycle does not proceed past initial fill

Possible Causes

  • Water supply turned off or extremely low pressure (medium)
  • Clogged inlet hose or filter restricting water flow (medium)
  • Faulty inlet valve or flow meter preventing correct water intake (medium)

How to Fix Error E10

DIY Fix Check water supply and hose condition

  1. Ensure the water tap supplying the dishwasher is fully open.
  2. Check that household water pressure is adequate.
  3. Inspect the inlet hose for kinks, bends, or visible blockages.
  4. If accessible, clean the small mesh filter at the dishwasher’s water inlet connection.

Technician Only Test and replace inlet valve/flow meter

  1. Disconnect power and water supply to dishwasher.
  2. Measure valve/flow meter electrical continuity and proper operation during fill cycle.
  3. Replace the inlet valve or flow meter assembly if found defective.

Parts needed: Water inlet valve, Flow meter (if equipped)

🛑 When to Call a Pro:
  • If the E10 code persists after verifying water supply, cleaning filters, and checking hoses
  • If internal parts such as inlet valve or flow meter need diagnosis or replacement

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Haier 0063000000
voltage_rating 120V AC

Common Questions

What does E10 error mean on haier dishwasher?

The E10 error indicates a water inlet issue, causing the dishwasher to not fill with water properly.

Can I fix haier dishwasher E10 error myself?

Yes, check the water supply, hose condition, and ensure there are no blockages.

How much does it cost to fix E10 error?

Repair costs for the E10 error typically range from ¥3000 to ¥8000, depending on parts and labor.

When should I call a technician for E10?

Call a technician if the E10 code persists after checking the water supply and if internal parts need replacement.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!