Haier Dishwasher Error A10

⚡ Quick Answer: The Haier Dishwasher A10 error code indicates an abnormal water fill condition, signaling that the appliance is not filling with water as expected. Th... ✅ DIY Fixable

What Does Error A10 Mean?

The Haier Dishwasher A10 error code indicates an abnormal water fill condition, signaling that the appliance is not filling with water as expected. This issue may arise from a blocked or kinked inlet hose, a closed water tap, or low water pressure. During operation, the dishwasher may stop and display the A10 code, often accompanied by unusual noises. To resolve this, check the water supply and hose for any obstructions or issues.

Common Symptoms:

  • Dishwasher stops and displays A10
  • Dishwasher does not fill with water or does not detect water entry

Possible Causes

  • Water inlet supply issue (hose blockage, kinked hose, tap closed, low pressure) (high)
  • Possible drain-related detection fault (community source) (low)

How to Fix Error A10

DIY Fix Check water supply and hose

  1. Ensure the water tap supplying the dishwasher is fully open.
  2. Inspect the inlet hose for kinks, bends, or visible blockages.
  3. Turn off the dishwasher, clear any debris at the hose inlet filter, then restart the program.

Technician Only Service inspection of inlet valve and pressure

  1. Measure incoming water pressure to ensure it's within manufacturer specifications.
  2. Check and clean internal inlet valve components and confirm proper operation.
  3. Verify that any aqua‑stop or safety cut‑off systems are functioning correctly.

Parts needed: Inlet hose, Water inlet valve, Aqua‑stop assembly (if present)

🛑 When to Call a Pro:
  • If the appliance still shows A10 after clearing inlet hose and verifying water supply
  • If water pressure is adequate but the unit fails to fill or displays additional error symptoms

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Haier 006267
voltage_rating 120V AC

Common Questions

What does A10 error mean on Haier Dishwasher?

A10 indicates a malfunction where the dishwasher fails to fill with water, often due to hose issues or low water pressure.

Can I fix Haier Dishwasher A10 error myself?

Yes, you can check the water supply, inspect the inlet hose for blockages, and clear the hose inlet filter.

How much does it cost to fix A10 error?

Estimated repair costs for the A10 error range from ¥5,000 to ¥20,000.

When should I call a technician for A10?

Call a technician if the error persists after checking the hose and water supply or if there are additional symptoms.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!