Gorenje Induction Hob Error E6

⚡ Quick Answer: The Gorenje induction hob error E6 indicates a malfunction related to the induction coil, often manifesting as unusual buzzing sounds and a flashing d... ✅ DIY Fixable

What Does Error E6 Mean?

The Gorenje induction hob error E6 indicates a malfunction related to the induction coil, often manifesting as unusual buzzing sounds and a flashing display. This error commonly arises when power levels exceed low settings and may interrupt the operation of one or more cooking zones. Potential causes include communication issues between the control module and power electronics or a faulty temperature sensor. The error may temporarily clear after the unit cools down.

Common Symptoms:

  • E6 appears when increasing power level above low settings (e.g., above level 2 on certain models) and interrupts normal operation of one or more zones.
  • Error may clear temporarily after hob cools or is idle for some time.

Possible Causes

  • Communication disturbance between control/filter module and power electronics (medium)
  • Faulty or malfunctioning temperature sensor or associated sensor circuitry (medium)

How to Fix Error E6

DIY Fix Basic checks and reset

  1. Turn off the induction hob and disconnect it from the mains power for at least 5–10 minutes.
  2. After waiting, reconnect the hob and try normal operation again.
  3. Ensure the hob surface and control area are clean and dry before use.

Technician Only Diagnostic of sensor and electronic modules

  1. Open the induction hob to access internal sensor connections and power/control modules.
  2. Measure and inspect the continuity of temperature sensors and sensor wiring for faults.
  3. Check for any communication faults between the control board and power electronics/filter module.
  4. Replace faulty sensors or communication-related modules as identified.

Parts needed: Temperature sensor(s), Control board, Power/filter module

🛑 When to Call a Pro:
  • If E6 persists after basic reset and cleaning.
  • If error appears immediately on powering the hob without any load.
  • If there are signs of electrical damage, burning smell, or visible component fault.

Technical Specifications

wattage 2000W
component Induction Coil
resistance 10-30 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does E6 error mean on gorenje induction hob?

E6 indicates a malfunction in the induction coil, often due to sensor or communication issues.

Can I fix gorenje induction hob E6 error myself?

Yes, try resetting the hob by disconnecting it from power for 5-10 minutes and ensuring it is clean and dry.

How much does it cost to fix E6 error?

Repair costs vary depending on parts and service rates, typically moderate.

When should I call a technician for E6?

Call a technician if E6 persists after a reset, appears immediately on startup, or if there are signs of electrical damage.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!