Gorenje Induction Hob Error ER22

⚡ Quick Answer: The gorenje induction hob error ER22 indicates a malfunction in the induction coil, often due to surface contamination or moisture affecting sensor op... ✅ DIY Fixable

What Does Error ER22 Mean?

The gorenje induction hob error ER22 indicates a malfunction in the induction coil, often due to surface contamination or moisture affecting sensor operation. Symptoms include the error code displayed on the panel, unresponsive touch controls, and non-operational heating zones. This issue may also cause unusual buzzing sounds or flickering display lights. Proper cleaning and resetting may resolve the issue.

Common Symptoms:

  • Error ER22 displayed on hob panel
  • Hob may not respond to touch controls
  • Affected heating zones may not operate

Possible Causes

  • Surface contamination or moisture interfering with sensor operation (medium)

How to Fix Error ER22

DIY Fix Clean surface and reset power

  1. Ensure hob surface is cool
  2. Thoroughly clean the glass‑ceramic surface and touch controls, removing any spills or moisture
  3. Disconnect the hob from power for 10–15 minutes
  4. Reconnect and try operation again

Technician Only Inspect sensors and internal components

  1. Disconnect power and remove hob from installation
  2. Visually inspect temperature sensors and contact points for damage or corrosion
  3. Test sensor continuity and hob control circuitry with appropriate tools
  4. Replace faulty sensors or control modules as needed

Parts needed: temperature sensors, control board modules

🛑 When to Call a Pro:
  • If the error persists after cleaning and reset
  • If hob fails to heat or shows additional error codes

Technical Specifications

wattage 2000W
component Induction Coil
resistance 0.5-2 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does ER22 error mean on gorenje induction hob?

ER22 indicates a malfunction in the induction coil, often related to sensor faults or surface contamination.

Can I fix gorenje induction hob ER22 error myself?

Yes, you can clean the surface and reset the power to troubleshoot the issue.

How much does it cost to fix ER22 error?

The estimated repair cost ranges from $100 to $300, depending on parts and region.

When should I call a technician for ER22?

Call a technician if the error persists after cleaning and resetting, or if the hob fails to heat.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!