Gorenje Induction Hob Error E-2

⚡ Quick Answer: The Gorenje induction hob E-2 error indicates a malfunction in the temperature sensor. This often results in the affected cooking zone failing to heat... ✅ DIY Fixable

What Does Error E-2 Mean?

The Gorenje induction hob E-2 error indicates a malfunction in the temperature sensor. This often results in the affected cooking zone failing to heat and may cause erratic display behavior. The error typically appears immediately when selecting heating power, suggesting a fault related to the induction coil or power module.

Common Symptoms:

  • Affected cooking zone shows E2
  • Zone will not heat when error displayed
  • Error appears immediately when selecting heating power

Possible Causes

  • Induction coil / power module fault (medium)

How to Fix Error E-2

DIY Fix Basic verification and reset

  1. Turn off the hob and disconnect it from the power supply.
  2. Wait several minutes to allow internal electronics to reset and cool down.
  3. Reconnect power and attempt to operate the affected zone again.

Technician Only Inspect and repair induction coil or power module

  1. Disconnect the hob from the mains and remove it from installation.
  2. Open the hob housing following manufacturer safety procedures.
  3. Inspect the induction coil and associated power module for damage, loose connections, or burnt components.
  4. Replace the defective induction coil or power module as identified.
  5. Reassemble and test the hob for proper operation.

Parts needed: induction coil, power module, associated connectors

🛑 When to Call a Pro:
  • If the error persists after basic reset and user-level checks
  • If there are signs of electrical damage or burning smells

Technical Specifications

wattage 3000W
component Temperature Sensor
resistance 10-15 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does E-2 error mean on gorenje induction hob?

The E-2 error indicates a temperature sensor malfunction, causing the affected zone to not heat.

Can I fix gorenje induction hob E-2 error myself?

Yes, you can try resetting the hob by turning it off, disconnecting from power, waiting, and reconnecting.

How much does it cost to fix E-2 error?

The estimated repair cost is between $100 and $300, depending on parts and labor.

When should I call a technician for E-2?

Call a technician if the error persists after a reset or if you notice electrical damage or burning smells.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!