Gorenje Induction Hob Error E5

⚡ Quick Answer: The gorenje induction hob E5 error indicates an overheating protection trigger, often due to an overcurrent or power limitation fault. This typically ... ✅ DIY Fixable

What Does Error E5 Mean?

The gorenje induction hob E5 error indicates an overheating protection trigger, often due to an overcurrent or power limitation fault. This typically occurs when multiple cooking zones are used simultaneously at high power, resulting in the hob shutting down unexpectedly and displaying the E5 code along with a hot surface warning. Ensuring proper ventilation and reducing the load can help prevent this issue.

Common Symptoms:

  • Hob displays E5 during operation
  • Cooking zones shut down unexpectedly
  • Error often occurs when multiple zones are used at high power

Possible Causes

  • Overcurrent / power limitation fault triggered by excessive load or internal current sensing fault (medium)

How to Fix Error E5

DIY Fix Reduce load and check ventilation

  1. Turn off the hob and disconnect power briefly.
  2. Try using fewer cooking zones simultaneously or lower power settings to see if E5 reappears.
  3. Ensure adequate airflow and that ventilation gaps under and around the hob are not blocked.

Technician Only Inspect power modules and current sensing circuitry

  1. With power disconnected, inspect the hob’s internal power module and heat sink for signs of overheating or damage.
  2. Verify that current sensors and related circuitry are functioning correctly.
  3. Check for signs of overheating on IGBT modules or power components and replace faulty modules if necessary.

Parts needed: Power module PCB, Current sensor / overcurrent protection circuitry, Cooling/heat sink components

🛑 When to Call a Pro:
  • If the error persists despite reducing load and ensuring ventilation
  • If internal inspection reveals damaged components
  • If you are not confident working with high-voltage internal parts

Next step

Choose the next step for E5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Diagnostic aid

Optional aid — no replacement part was confirmed

Digital Multimeter

Essential tool for diagnosing electrical continuity, voltage, and resistance problems.

No purchase link is shown because the diagnosis is not specific enough to recommend a product.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 3500W
component Overheating sensor
resistance 5-15 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does E5 error mean on gorenje induction hob?

E5 error indicates an overheating protection trigger, often due to overcurrent from using multiple zones at high power.

Can I fix gorenje induction hob E5 error myself?

Yes, you can try reducing the load or using fewer cooking zones simultaneously to see if the error persists.

How much does it cost to fix E5 error?

Repair costs vary by model and parts, typically moderate to high for power module replacements.

When should I call a technician for E5?

Call a technician if the error persists after you reduce the load or if you find damaged components during inspection.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!