Gorenje Induction Hob Error E3
⚡ Quick Answer: The Gorenje induction hob E3 error code indicates a malfunction related to the temperature sensor. This can result in the display showing fluctuating ... ✅ DIY Fixable
What Does Error E3 Mean?
The Gorenje induction hob E3 error code indicates a malfunction related to the temperature sensor. This can result in the display showing fluctuating temperatures or the induction zone failing to heat properly. Common causes include issues with the supply voltage or pan detection, often due to unsuitable cookware or a faulty pan sensor.
Common Symptoms:
- Error code E3 displayed on the hob control panel
- Induction zone shuts down or will not heat properly when E3 appears
- May occur immediately on power‑up or when selecting high power
Possible Causes
- Supply voltage out of range (power irregularity) (medium)
- Pan detection / unsuitable cookware or faulty pan sensor (medium)
How to Fix Error E3
DIY Fix Check cookware and power connection
- Ensure cookware placed on the active zone is induction‑compatible (flat bottom, ferromagnetic).
- Confirm the cookware covers the induction zone appropriately.
- Try powering the hob off and unplugging at the mains for several minutes, then restart.
- Check that the power supply to the hob is stable and within household voltage norms.
Technician Only Diagnose electrical and sensor components
- Measure incoming supply voltage to verify it is within specified range for the hob.
- Test and, if necessary, replace the pan detection sensor or coil sensor circuits.
- Inspect internal power control module and main PCB for signs of voltage stress or failure.
- Verify correct grounding of the appliance and check for loose wiring connections.
Parts needed: Pan detection / cookware sensor, Main control board / power module, Internal wiring/connectors
- If the E3 error persists after verifying correct induction cookware and stable power supply.
- If internal component diagnostics (voltage and sensors) indicate failure or if you are not experienced with appliance electrical repair.
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E3 error mean on gorenje induction hob?
The E3 error indicates a temperature sensor malfunction, causing heating issues.
Can I fix gorenje induction hob E3 error myself?
Yes, check cookware compatibility and power connection; restart the hob if necessary.
How much does it cost to fix E3 error?
Repair costs vary; sensor replacements are typically lower, while control board repairs are higher.
When should I call a technician for E3?
Call a technician if the error persists after verifying cookware and power supply, or if diagnostics indicate failure.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!