Gorenje Induction Hob Error E2

⚡ Quick Answer: The Gorenje induction hob displays the E2 error when a malfunction occurs in the temperature sensor, preventing the affected cooking zone from heating... ✅ DIY Fixable

What Does Error E2 Mean?

The Gorenje induction hob displays the E2 error when a malfunction occurs in the temperature sensor, preventing the affected cooking zone from heating. This issue is often accompanied by a beeping sound and a flashing display. It typically arises shortly after initiating a heating cycle, indicating an internal overheat condition or a sensor fault.

Common Symptoms:

  • Cooking zone will not heat when E2 is displayed
  • Error appears shortly after attempting to start a heating cycle

Possible Causes

  • Internal overheat condition or temperature sensor fault (general induction hob pattern) (low)

How to Fix Error E2

DIY Fix Basic checks and reset

  1. Turn off the induction hob and remove cookware from the affected zone
  2. Allow the hob to cool completely (several minutes)
  3. Switch the hob power off at the breaker or unplug (if possible) for about one minute
  4. Restore power and test if the error clears

Technician Only Service inspection for internal sensor or control faults

  1. Visually inspect internal temperature sensors and connections for signs of damage or overheating
  2. Measure temperature sensor resistances to check for open/short conditions
  3. Inspect cooling fans/vents for blockages or failures
  4. Test or replace faulty sensors or control board modules as needed

Parts needed: Temperature sensor(s), Control board, Cooling fan/vent components

🛑 When to Call a Pro:
  • The error persists after basic reset and cooling attempts
  • There are signs of burning smell, smoke, or visible damage around the hob
  • Induction hob repeatedly displays E2 on multiple zones

Technical Specifications

wattage 3000W
component Temperature Sensor
resistance 10-30 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does E2 error mean on gorenje induction hob?

E2 error indicates a temperature sensor malfunction, causing the cooking zone to not heat.

Can I fix gorenje induction hob E2 error myself?

Yes, try turning off the hob, removing cookware, cooling it down, and resetting the power.

How much does it cost to fix E2 error?

Repair costs can vary by region, typically ranging from $100 to $300 for parts and labor.

When should I call a technician for E2?

Call a technician if the error persists after basic resets or if there's a burning smell or visible damage.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!