Gorenje Induction Hob Error E1
⚡ Quick Answer: The gorenje induction hob E1 error indicates a malfunction in the induction coil, typically triggered by overheating protection or a faulty internal t... ✅ DIY Fixable
What Does Error E1 Mean?
The gorenje induction hob E1 error indicates a malfunction in the induction coil, typically triggered by overheating protection or a faulty internal temperature sensor. This error is often accompanied by a flashing display and results in the affected cooking zone shutting down shortly after activation, failing to heat up properly.
Common Symptoms:
- Error appears shortly after switching on the induction zone
- Affected zone shuts down and does not heat
Possible Causes
- Overheating of the induction zone / internal temperature sensor fault (medium)
How to Fix Error E1
DIY Fix Basic checks and cooling
- Turn off the induction hob and allow the cooking zone to cool completely.
- Ensure there are no heavy obstructions (e.g., pots too large or blocking ventilation) on the zone.
- Check that cookware is appropriate.
Technician Only Inspect internal temperature sensing components
- Disconnect power to the induction hob.
- Check internal temperature sensors and associated wiring for faults or damage.
- Test the induction module to verify that overheating protection circuits are functioning correctly.
- Replace faulty temperature sensor or related control components if needed.
Parts needed: Temperature sensor / thermistor, Induction control board or module, Associated wiring harness
- If the error persists after cooling and basic user‑level checks
- If the induction zone overheats repeatedly under normal operation
- If internal components show signs of damage
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Induction Coil |
| resistance | 1-5 ohms |
| part_number | Gorenje 123456789 |
| voltage_rating | 230V AC |
Common Questions
What does E1 error mean on gorenje induction hob?
E1 error signifies a malfunction in the induction coil, usually due to overheating or a faulty temperature sensor.
Can I fix gorenje induction hob E1 error myself?
Yes, you can perform basic checks like cooling the zone, ensuring no obstructions, and using appropriate cookware.
How much does it cost to fix E1 error?
Repair costs for the E1 error range from ¥10,000 to ¥40,000, depending on parts and service rates.
When should I call a technician for E1?
Call a technician if the error persists after cooling, if overheating recurs, or if internal components are damaged.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!