Gorenje Induction Hob Error E-3

⚡ Quick Answer: The Gorenje induction hob error E-3 indicates an overheating issue detected by the temperature sensor, causing the hob to shut down. This error may oc... ✅ DIY Fixable

What Does Error E-3 Mean?

The Gorenje induction hob error E-3 indicates an overheating issue detected by the temperature sensor, causing the hob to shut down. This error may occur during high power settings or even with no cookware present. Possible causes include unstable power supply or the use of unsuitable cookware that isn't recognized by the hob. To resolve this, check your power supply and ensure that you are using induction-compatible cookware.

Common Symptoms:

  • Hob shuts down or refuses to heat when E‑3 appears
  • Error appears upon selecting higher power settings
  • Error may appear with or without cookware on the zone

Possible Causes

  • Supply voltage out of range (power issue) (medium)
  • Unsuitable or undetected cookware (pan detection issue) (low)

How to Fix Error E-3

DIY Fix Check power supply and cookware

  1. Ensure the induction hob is connected to a stable, correctly rated domestic supply.
  2. Try using correctly sized, induction‑compatible cookware centered on the cooking zone.
  3. Turn off the hob, wait a few minutes, then switch it on again to see if the code clears.

Technician Only Verify electrical supply and internal components

  1. Measure the incoming supply voltage at the hob connection to ensure it is within specification.
  2. Inspect and test pan detection sensors and associated wiring for faults.
  3. Check the hob’s internal power electronics/control board for damage related to voltage irregularities.

Parts needed: Multimeter for voltage measurement, Pan detection sensor assembly, Power/control board (if required)

🛑 When to Call a Pro:
  • If error persists after checking power supply and cookware
  • If multiple error codes appear or the hob shows signs of electrical fault

Technical Specifications

wattage 3500W
component Temperature Sensor
resistance 10-30 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does E-3 error mean on gorenje induction hob?

E-3 indicates overheating detection, causing shutdown, often due to power or cookware issues.

Can I fix gorenje induction hob E-3 error myself?

Yes, check the power supply and ensure you're using suitable induction-compatible cookware.

How much does it cost to fix E-3 error?

Repair costs for E-3 error range from ¥10,000 to ¥40,000+, depending on parts and labor.

When should I call a technician for E-3?

Call a technician if the error persists after checking power and cookware, or if multiple error codes appear.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!